Re: [RFC PATCH v1 1/1] mailbox: arm_mhuv3: Keep the combined IRQ enabled during system suspend

From: Finley Xiao

Date: Wed Sep 30 2026 - 05:41:49 EST



在 2026/9/30 16:50, Sudeep Holla 写道:
On Wed, Sep 30, 2026 at 11:36:57AM +0800, Finley Xiao wrote:
When MHUv3 is used as the SCMI mailbox transport (arm,scmi-mailbox),
SCMI clock and power-domain operations still need to work in the noirq
phase of system suspend: genpd may power off a device's parent domain
from genpd_suspend_noirq(), which issues scmi_clock_config_set() /
scmi_power_state_set() and waits for the firmware reply via the mailbox
RX IRQ.

However, dpm_suspend_noirq() calls suspend_device_irqs() before running
the suspend_noirq callbacks, so the combined interrupts are already
masked at that point and the SCMI transfer times out while waiting for
the reply.

Both the PBX and MBX combined interrupts are requested as threaded
IRQs with only IRQF_ONESHOT. The MBX combined IRQ must stay enabled so
that firmware replies are delivered, and the PBX combined IRQ, used
for txdone by IRQ when not in polling mode, needs the same treatment.

IRQ threads are not frozen during system suspend, so with
IRQF_NO_SUSPEND the threaded combined-IRQ handlers still run in the
noirq phase.

Add IRQF_NO_SUSPEND to the MHUv3 combined IRQ registrations so that
SCMI remains functional throughout the suspend/resume cycle.

Looks good to me. Just to confirm, the expectation is to just have the
IRQs functional during suspend/resume cycle only and *not to wake up* the
system right ? If you need wakeup, you need to do more work.

Yes, exactly. We just need the IRQs functional during the suspend/resume
cycle (for SCMI traffic in the noirq phase), not to wake up the system.

Thanks for the review.


For this change,

Reviewed-by: Sudeep Holla <sudeep.holla@xxxxxxxxxx>

Jassi,

Please pick this up for next cycle when you are at it. Thanks!

--
Best regards,

底层平台中心 肖锋(Finley Xiao)
************************************************************************************
瑞芯微电子股份有限公司
Rockchip Electronics Co., Ltd.
福建省福州市铜盘路软件大道89号软件园A区21号楼 350003
No.21 Building, A District, Fuzhou Software Park, Fuzhou, Fujian 350003, P.R. China
Tel: 0591-83991906-8602 Mobile: 18506057603
************************************************************************************