[PATCH 0/4] ARM: dts: imx6: phycore-som: PMIC and PHY fixes

[Primoz Fiser]

A few small fixes for the PHYTEC phyCORE-i.MX6 SOM:

- Pin the DA9062 PMIC watchdog to /dev/watchdog0 (1/4).
- Raise the PMIC's SOC/ARM buck ceiling to 1.5V, needed once the
  1.2GHz OPP tier ([1]] requests 1.3V for VDD_ARM and the anatop
  LDO's 125mV dropout is added on top (2/4).
- Migrate the Ethernet PHY reset off the deprecated fsl,fec.yaml
  phy-reset-gpios property onto the generic ethernet-phy.yaml
  reset-gpios/reset-assert-us binding (3/4, 4/4).

[1] https://lore.kernel.org/all/20260923070505.494949-1-primoz.fiser@xxxxxxxxx/

Primoz Fiser (4):
  ARM: dts: imx6: phycore-som: Set PMIC watchdog alias as default
  ARM: dts: imx6: phycore-som: Increase PMIC max SOC and ARM voltage
  ARM: dts: imx6: phycore-som: Convert to generic PHY reset binding
  ARM: dts: imx6: phycore-som: Add reset-assert-us for PHY reset

 .../boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi   | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

-- 
2.34.1