[PATCH v5 08/10] iio: adc: ti-ads1015: use managed runtime PM setup

[Archit Anant]

Use devm_pm_runtime_set_active_enabled() to combine setting the device
active and enabling runtime PM.

Previously, probe explicitly called pm_runtime_set_active() followed by
devm_pm_runtime_enable(). The managed helper changes the teardown
semantics by associating runtime PM enablement with the device-managed
lifetime.

The runtime suspend and resume callbacks only update the conversion-mode
bits through regmap. They do not manipulate runtime-PM usage counts or
other shared resources such as regulators or clocks, so this change does
not introduce an additional runtime-PM reference or resource-balance
operation in this driver.

Signed-off-by: Archit Anant <architanant5@xxxxxxxxx>
---
 drivers/iio/adc/ti-ads1015.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c
index a790f694a1a9..9312822218df 100644
--- a/drivers/iio/adc/ti-ads1015.c
+++ b/drivers/iio/adc/ti-ads1015.c
@@ -1046,12 +1046,9 @@ static int ads1015_probe(struct i2c_client *client)
 
 	data->conv_invalid = true;
 
-	ret = pm_runtime_set_active(dev);
-	if (ret)
-		return ret;
 	pm_runtime_set_autosuspend_delay(dev, ADS1015_SLEEP_DELAY_MS);
 	pm_runtime_use_autosuspend(dev);
-	ret = devm_pm_runtime_enable(dev);
+	ret = devm_pm_runtime_set_active_enabled(dev);
 	if (ret)
 		return ret;
 
-- 
2.39.5