Re: [PATCH v3] drm/msm/dp: allow eDP sinks without DP_SINK_COUNT

[Dmitry Baryshkov]

On Thu, Sep 17, 2026 at 06:17:06PM +0530, Vivek Kumar wrote:
> Some eDP sinks, especially fixed-format eDP-to-HDMI bridge chips with
> no downstream AUX-capable panel behind them, do not report a non-zero
> DP_SINK_COUNT even though they participate normally in DPCD capability
> exchange and link training.
> 
> Treating sink_count == 0 as a permanent disconnect is valid for external
> DisplayPort, but it breaks eDP probe/enable paths in
> msm_dp_display_prepare_link().
> 
> Use the same eDP exemption as drm_dp_read_sink_count_cap() for the raw
> sink_count checks in this driver, via a small shared helper, so valid eDP
> outputs are not rejected as disconnected just because the downstream sink
> does not expose a usable DP_SINK_COUNT.

This will still break if the DP has no sink count cap. Could you switch
your workaround to using the function which you just mentioned?

> 
> Tested on a Qualcomm QCS6490-based board driving a fixed-format
> eDP-to-HDMI bridge IC (chrontel,ch7218a).
> 
> Signed-off-by: Vivek Kumar <vk092kumar@xxxxxxxxx>
> ---
>  drivers/gpu/drm/msm/dp/dp_aux.c  |  8 ++++++++
>  drivers/gpu/drm/msm/dp/dp_aux.h  |  1 +
>  drivers/gpu/drm/msm/dp/dp_link.c | 10 ++++++++++
>  3 files changed, 19 insertions(+)
> 
> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.h b/drivers/gpu/drm/msm/dp/dp_aux.h
> index 4be02e8b4d0b..9ab401c8526f 100644
> --- a/drivers/gpu/drm/msm/dp/dp_aux.h
> +++ b/drivers/gpu/drm/msm/dp/dp_aux.h
> @@ -22,6 +22,7 @@ void msm_dp_aux_hpd_intr_enable(struct drm_dp_aux *msm_dp_aux);
>  void msm_dp_aux_hpd_intr_disable(struct drm_dp_aux *msm_dp_aux);
>  u32 msm_dp_aux_get_hpd_intr_status(struct drm_dp_aux *msm_dp_aux);
>  u32 msm_dp_aux_is_link_connected(struct drm_dp_aux *msm_dp_aux);
> +bool msm_dp_aux_is_edp(struct drm_dp_aux *msm_dp_aux);
>  
>  struct phy;
>  struct drm_dp_aux *msm_dp_aux_get(struct device *dev,
> diff --git a/drivers/gpu/drm/msm/dp/dp_link.c b/drivers/gpu/drm/msm/dp/dp_link.c
> index 34a91e194a12..bf08b5b18097 100644
> --- a/drivers/gpu/drm/msm/dp/dp_link.c
> +++ b/drivers/gpu/drm/msm/dp/dp_link.c
> @@ -725,6 +725,16 @@ static int msm_dp_link_parse_sink_status_field(struct msm_dp_link_private *link)
>  		DRM_ERROR("DP parse sink count failed\n");
>  		return ret;
>  	}
> +
> +	/*
> +	 * Some eDP sinks do not report a valid sink count, even though they
> +	 * otherwise participate in link training and DPCD capability exchange.
> +	 * Treat a zero raw count as a valid non-zero placeholder so we do not
> +	 * misclassify the link as disconnected on eDP.
> +	 */

I'm sorry, but this looks like you are using an AI agent. If so, please
see Documentation/process/coding-assistants.rst.

The comment duplicates commit message and is generally useless. Please
drop it.

> +	if (msm_dp_aux_is_edp(link->aux) && ret == 0)
> +		ret = 1;
> +
>  	link->msm_dp_link.sink_count = ret;
>  
>  	ret = drm_dp_dpcd_read_link_status(link->aux,
> -- 
> 2.55.0
> 

-- 
With best wishes
Dmitry