[PATCH 0/4] Exynos850 ADC support and soc thermistor

[Alexey Klimov]

Hi all,

This small series adds support for the ADC block found in the Samsung
Exynos850 SoC and enables the Murata NTC thermistor on the WinLink E850-96
development board.

Exynos850 ADC is also called ADC v3 in downstream but my understanding is
that SoC names are more prefered.

It also relies on PMIC 1.8v regulator which currently represented as a
dummy one.

First commit adds compatible for device tree bindings, second one adds
support in the driver and last two place things in device tree files for
E850-96 board.

This was tested on mentioned above WinLink E850-96 by reading reported
temperatures from thermistor.

Signed-off-by: Alexey Klimov <alexey.klimov@xxxxxxxxxx>
---
Alexey Klimov (4):
      dt-bindings: iio: adc: samsung,exynos: Add Exynos850 compatible
      iio: adc: exynos_adc: add Exynos850 support
      arm64: dts: exynos850: add ADC node
      arm64: dts: exynos850-e850-96: add soc thermistor node

 .../bindings/iio/adc/samsung,exynos-adc.yaml       |  1 +
 arch/arm64/boot/dts/exynos/exynos850-e850-96.dts   | 22 ++++++++
 arch/arm64/boot/dts/exynos/exynos850.dtsi          | 10 ++++
 drivers/iio/adc/exynos_adc.c                       | 66 +++++++++++++++++++++-
 4 files changed, 97 insertions(+), 2 deletions(-)
---
base-commit: 6375e61c01e93e35ee7acd336a689ac1fae4b509
change-id: 20261001-exynos850_adc-b4321995389b

Best regards,
-- 
Alexey Klimov <alexey.klimov@xxxxxxxxxx>