[PATCH v5 08/11] phy: qualcomm: qmp-combo: Remove VCO_DIV programming from qmp_v8_configure_dp_clocks()

[Nabige Aala]

From: Ritesh Kumar <ritesh.kumar@xxxxxxxxxxxxxxxx>

QPHY_DP_PHY_VCO_DIV register does not participate in the
divider of vco_divided_clk, it can be left as it is- No impact

Fixes: d10736db98d25 ("phy: qualcomm: qmp-combo: Add DP offsets and settings for Glymur platforms")
Signed-off-by: Ritesh Kumar <ritesh.kumar@xxxxxxxxxxxxxxxx>
Signed-off-by: Mahadevan P <mahadevan.p@xxxxxxxxxxxxxxxx>
Signed-off-by: Nabige Aala <nabige.aala@xxxxxxxxxxxxxxxx>
---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index fc35da80e57f..6f5d32afae67 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -3897,32 +3897,26 @@ static void qmp_v4_configure_dp_tx(struct qmp_combo *qmp)
 static int qmp_v8_configure_dp_clocks(struct qmp_combo *qmp)
 {
 	const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
-	u32 phy_vco_div;
 	unsigned long pixel_freq;
 	const struct qmp_phy_cfg *cfg = qmp->cfg;
 
 	switch (dp_opts->link_rate) {
 	case 1620:
-		phy_vco_div = 0x4;
 		pixel_freq = 1620000000UL / 2;
 		break;
 	case 2700:
-		phy_vco_div = 0x2;
 		pixel_freq = 2700000000UL / 2;
 		break;
 	case 5400:
-		phy_vco_div = 0x4;
 		pixel_freq = 5400000000UL / 4;
 		break;
 	case 8100:
-		phy_vco_div = 0x3;
 		pixel_freq = 8100000000UL / 6;
 		break;
 	default:
 		/* Other link rates aren't supported */
 		return -EINVAL;
 	}
-	writel(phy_vco_div, qmp->dp_dp_phy + cfg->regs[QPHY_DP_PHY_VCO_DIV]);
 
 	/* disable core reset tsync */
 	writel(0x09, qmp->dp_dp_phy + QSERDES_DP_PHY_CFG);

-- 
2.34.1