[PATCH v2 3/3] arm64: dts: aspeed: Add syscon phandle to AST2700 ADC nodes

[Billy Tsai]

Point the ADC nodes at their own syscon1 so the driver can correctly
locate the reference-voltage trimming data on AST2700, where syscon0
and syscon1 share the same device-tree node name and would otherwise
resolve to the wrong SCU.

Signed-off-by: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
Assisted-by: Claude:claude-sonnet-5
---
 arch/arm64/boot/dts/aspeed/aspeed-g7-soc1.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/aspeed/aspeed-g7-soc1.dtsi b/arch/arm64/boot/dts/aspeed/aspeed-g7-soc1.dtsi
index bc990f79e693..053673cc4b8e 100644
--- a/arch/arm64/boot/dts/aspeed/aspeed-g7-soc1.dtsi
+++ b/arch/arm64/boot/dts/aspeed/aspeed-g7-soc1.dtsi
@@ -246,6 +246,7 @@ adc0: adc@14c00000 {
 		clocks = <&syscon1 SCU1_CLK_AHB>;
 		resets = <&syscon1 SCU1_RESET_ADC>;
 		interrupts-extended = <&intc1 80>;
+		aspeed,trim-syscon = <&syscon1>;
 		#io-channel-cells = <1>;
 		status = "disabled";
 	};
@@ -256,6 +257,7 @@ adc1: adc@14c00100 {
 		clocks = <&syscon1 SCU1_CLK_AHB>;
 		resets = <&syscon1 SCU1_RESET_ADC>;
 		interrupts-extended = <&intc1 80>;
+		aspeed,trim-syscon = <&syscon1>;
 		#io-channel-cells = <1>;
 		status = "disabled";
 	};

-- 
2.34.1