[PATCH v1 0/2] ARM: dts: imx: enable SPI on Apalis iMX6 and Colibri iMX7

[Francesco Dolcini]

From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>

The SPI controllers of the Apalis iMX6 and Colibri iMX6ULL modules are
disabled in the module device tree and no carrier board enabled them.

A device can be instantiated from user space through the spi_master
new_device sysfs interface, so enable the controllers on the carrier
boards where the signals reach a user accessible connector.
The Colibri iMX6 and iMX7 carrier boards and the Apalis iMX8 ones
already do this.

Francesco Dolcini (2):
  ARM: dts: imx6q-apalis: enable SPI1 and SPI2
  ARM: dts: imx6ull-colibri-iris: enable SPI

 arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi      | 10 ++++++++++
 arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts | 10 ++++++++++
 arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora.dts      | 10 ++++++++++
 arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi   |  5 +++++
 4 files changed, 35 insertions(+)

-- 
2.47.3