[PATCH net-next v2 03/12] net: dsa: Kconfig: Expand config description to cover RZ/T2H and RZ/N2H ETHSW

[Prabhakar]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>

Update the Kconfig entry for the RZN1 A5PSW tag driver to reflect that
the same tagging format is also used by the ETHSW blocks found in Renesas
RZ/T2H and RZ/N2H SoCs.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
v1->v2:
- Updated description for Kconfig entry to cover RZ/T2H and RZ/N2H ETHSW
---
 net/dsa/Kconfig | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index 4f44bf3ede23..88e181ad4cc3 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -188,11 +188,12 @@ config NET_DSA_TAG_RTL8_4
 	  switches with 8 byte protocol 4 tags, such as the Realtek RTL8365MB-VC.
 
 config NET_DSA_TAG_RZN1_A5PSW
-	tristate "Tag driver for Renesas RZ/N1 A5PSW switch"
+	tristate "Tag driver for Renesas RZ/N1 A5PSW and RZ/T2H, RZ/N2H ETHSW"
 	help
-	  Say Y or M if you want to enable support for tagging frames for
-	  Renesas RZ/N1 embedded switch that uses an 8 byte tag located after
-	  destination MAC address.
+	  Say Y or M if you want to enable frame tagging support for embedded
+	  switches found on Renesas RZ/N1 (A5PSW) and RZ/T2H, RZ/N2H (ETHSW)
+	  SoCs. These switches use an 8-byte tag located after the destination
+	  MAC address.
 
 config NET_DSA_TAG_LAN9303
 	tristate "Tag driver for SMSC/Microchip LAN9303 family of switches"
-- 
2.55.0