Re: [PATCH v3 1/2] dt-bindings: display: panel: Add RAiO RA8875 display controller
From: Conor Dooley
Date: Thu Oct 01 2026 - 14:56:46 EST
On Thu, Oct 01, 2026 at 10:41:25PM +0800, Adam Azuddin wrote:
> The binding is for SPI-connected RA8875 TFT display controller by RAiO
> Technology Inc. It supports display resolutions of up to 800x480.
>
> Assisted-by: LLM
> Signed-off-by: Adam Azuddin <azuddinadam@xxxxxxxxx>
> ---
> .../bindings/display/panel/raio,ra8875.yaml | 77 +++++++++++++++++++
> .../devicetree/bindings/vendor-prefixes.yaml | 2 +
> 2 files changed, 79 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/raio,ra8875.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/panel/raio,ra8875.yaml b/Documentation/devicetree/bindings/display/panel/raio,ra8875.yaml
> new file mode 100644
> index 000000000000..4283de927b13
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/raio,ra8875.yaml
> @@ -0,0 +1,77 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/raio,ra8875.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: RAiO RA8875 Display Controller
> +
> +maintainers:
> + - Adam Azuddin <azuddinadam@xxxxxxxxx>
> +
> +description:
> + The RA8875 is a TFT LCD controller for panels up to 800x480 pixels.
> + It can be connected to the controller via 8080/6800 parallel interface,
> + SPI or I2C. This binding describes the SPI-connected device.
This binding describes all three, or at least it should describe both
i2c and spi in the current state. I have no idea what the parallel
interfaces look like in dt, but if what you've got covers spi it should
also cover i2c. Probably remove this last sentence.
pw-bot: changes-requested
> +
> +allOf:
> + - $ref: panel-common.yaml#
> + - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +properties:
> + compatible:
> + const: raio,ra8875
> +
> + reg:
> + maxItems: 1
> +
> + vdd-supply:
> + description:
> + 3.3 V supply for the IO pins, the oscillator IO pins, the ADC pins
> + and the internal LDO. The 1.8 V core rail is generated internally.
> +
> + reset-gpios:
> + description:
> + GPIO connected to the active-low RST# pin. Optional, since the board
> + may instead use an RC reset circuit.
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> + - display-timings
> + - vdd-supply
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + spi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + panel: display@0 {
Drop the unused panel label if there's a respin.
> + compatible = "raio,ra8875";
> + reg = <0>;
> + spi-max-frequency = <16000000>;
> + vdd-supply = <&vcc_3v3>;
> + reset-gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
> +
> + display-timings {
> + native-mode = <&timing0>;
> + timing0: timing0 {
> + clock-frequency = <25000000>;
> + hactive = <800>;
> + vactive = <480>;
> + hfront-porch = <40>;
> + hsync-len = <40>;
> + hback-porch = <40>;
> + vfront-porch = <10>;
> + vsync-len = <10>;
> + vback-porch = <20>;
> + };
> + };
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> index ba2002969373..99d5113fb035 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> @@ -1395,6 +1395,8 @@ patternProperties:
> description: Radxa
> "^raidsonic,.*":
> description: RaidSonic Technology GmbH
> + "^raio,.*":
> + description: RAiO Technology Inc.
> "^ralink,.*":
> description: Mediatek/Ralink Technology Corp.
> "^ramtron,.*":
> --
> 2.55.0
>
Attachment:
signature.asc
Description: PGP signature