[PATCH 09/38] arm: dts: qcom: apq8060: Align multiple property data
From: Waqar Hameed
Date: Thu Oct 01 2026 - 18:38:42 EST
Multiple property data on a newline should be aligned with the first
one. Found/fixed with dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@xxxxxxxx>
---
arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
index fa2b372e51bf3..4dc63032cccb6 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
@@ -99,7 +99,7 @@ ethernet@2,0 {
* for network wakeup, connected to the TLMM.
*/
interrupts-extended = <&pm8058_gpio 7 IRQ_TYPE_EDGE_FALLING>,
- <&tlmm 29 IRQ_TYPE_EDGE_RISING>;
+ <&tlmm 29 IRQ_TYPE_EDGE_RISING>;
reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
vdd33a-supply = <&dragon_veth>;
vddvario-supply = <&dragon_vario>;
@@ -861,7 +861,7 @@ cmd-pins {
data-pins {
/* SDC1 D0 to D7 */
pins = "gpio159", "gpio160", "gpio161", "gpio162",
- "gpio163", "gpio164", "gpio165", "gpio166";
+ "gpio163", "gpio164", "gpio165", "gpio166";
function = "sdc1";
drive-strength = <10>;
bias-pull-up;
--
2.43.0