[PATCH 07/38] arm: dts: qcom: apq8026: Add space between OR-operator

[Waqar Hameed]

There should be a space between binary operators. Found/fixed with
dtfmt (Devicetree Source formatter).

Signed-off-by: Waqar Hameed <waqar.hameed@xxxxxxxx>
---
 arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts
index a8543ca7b5569..da0b5969c8320 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts
@@ -86,8 +86,8 @@ key-volume-up {
 
 	i2c-backlight {
 		compatible = "i2c-gpio";
-		sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 		pinctrl-0 = <&backlight_i2c_default_state>;
 		pinctrl-names = "default";
-- 
2.43.0