[PATCH 11/38] arm: dts: qcom: apq8064: Add newline between subnodes

[Waqar Hameed]

There should be a newline (and only one) between subnodes. Found/fixed
with dtfmt (Devicetree Source formatter).

Signed-off-by: Waqar Hameed <waqar.hameed@xxxxxxxx>
---
 .../boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts    |  2 ++
 arch/arm/boot/dts/qcom/qcom-apq8064.dtsi              | 11 +++++++++--
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
index 9471839928505..bdd3dab530ece 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
@@ -53,6 +53,7 @@ key-volume-up {
 			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_VOLUMEUP>;
 		};
+
 		key-volume-down {
 			label = "Volume Down";
 			gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>;
@@ -330,6 +331,7 @@ pm8921_lvs5: lvs5 {
 		pm8921_lvs6: lvs6 {
 			bias-pull-down;
 		};
+
 		/*
 		 * mipi_dsi.1-dsi1_vddio
 		 * pil_riva-pll_vdd
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 09062b2ad8ba5..0423b9380c812 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -116,6 +116,7 @@ cpu_alert0: trip0 {
 					hysteresis = <2000>;
 					type = "passive";
 				};
+
 				cpu_crit0: trip1 {
 					temperature = <110000>;
 					hysteresis = <2000>;
@@ -137,6 +138,7 @@ cpu_alert1: trip0 {
 					hysteresis = <2000>;
 					type = "passive";
 				};
+
 				cpu_crit1: trip1 {
 					temperature = <110000>;
 					hysteresis = <2000>;
@@ -158,6 +160,7 @@ cpu_alert2: trip0 {
 					hysteresis = <2000>;
 					type = "passive";
 				};
+
 				cpu_crit2: trip1 {
 					temperature = <110000>;
 					hysteresis = <2000>;
@@ -179,6 +182,7 @@ cpu_alert3: trip0 {
 					hysteresis = <2000>;
 					type = "passive";
 				};
+
 				cpu_crit3: trip1 {
 					temperature = <110000>;
 					hysteresis = <2000>;
@@ -707,6 +711,7 @@ qfprom: efuse@700000 {
 			tsens_calib: calib@404 {
 				reg = <0x404 0x10>;
 			};
+
 			tsens_backup: backup-calib@414 {
 				reg = <0x414 0x10>;
 			};
@@ -1177,7 +1182,6 @@ dsi0_out: endpoint {
 			};
 		};
 
-
 		dsi0_phy: phy@4700200 {
 			compatible = "qcom,dsi-phy-28nm-8960";
 			#clock-cells = <1>;
@@ -1249,7 +1253,6 @@ dsi1_out: endpoint {
 			};
 		};
 
-
 		dsi1_phy: dsi-phy@5800200 {
 			compatible = "qcom,dsi-phy-28nm-8960";
 			reg = <0x05800200 0x100>,
@@ -1596,18 +1599,21 @@ funnel_in0: endpoint {
 						remote-endpoint = <&etm0_out>;
 					};
 				};
+
 				port@1 {
 					reg = <1>;
 					funnel_in1: endpoint {
 						remote-endpoint = <&etm1_out>;
 					};
 				};
+
 				port@4 {
 					reg = <4>;
 					funnel_in4: endpoint {
 						remote-endpoint = <&etm2_out>;
 					};
 				};
+
 				port@5 {
 					reg = <5>;
 					funnel_in5: endpoint {
@@ -1698,4 +1704,5 @@ etm3_out: endpoint {
 		};
 	};
 };
+
 #include "qcom-apq8064-pins.dtsi"
-- 
2.43.0