[PATCH 35/38] arm: dts: qcom: msm8974: Add newline between subnodes

[Waqar Hameed]

There should be a newline between subnodes. Found/fixed with
dtfmt (Devicetree Source formatter).

Signed-off-by: Waqar Hameed <waqar.hameed@xxxxxxxx>
---
 arch/arm/boot/dts/qcom/qcom-msm8974.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
index 4c2730b34cd1d..1a2f0cc9f8a03 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
@@ -960,6 +960,7 @@ replicator_out0: endpoint {
 						remote-endpoint = <&etr_in>;
 					};
 				};
+
 				port@1 {
 					reg = <1>;
 					replicator_out1: endpoint {
@@ -1083,18 +1084,21 @@ kpss_in0: endpoint {
 						remote-endpoint = <&etm0_out>;
 					};
 				};
+
 				port@1 {
 					reg = <1>;
 					kpss_in1: endpoint {
 						remote-endpoint = <&etm1_out>;
 					};
 				};
+
 				port@2 {
 					reg = <2>;
 					kpss_in2: endpoint {
 						remote-endpoint = <&etm2_out>;
 					};
 				};
+
 				port@3 {
 					reg = <3>;
 					kpss_in3: endpoint {
@@ -1785,6 +1789,7 @@ blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
 				drive-strength = <2>;
 				bias-pull-up;
 			};
+
 			/* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */
 
 			/* BLSP2_I2C1 info is missing */
@@ -1872,14 +1877,17 @@ mosi-pins {
 					pins = "gpio45";
 					function = "blsp_spi8";
 				};
+
 				miso-pins {
 					pins = "gpio46";
 					function = "blsp_spi8";
 				};
+
 				cs-pins {
 					pins = "gpio47";
 					function = "blsp_spi8";
 				};
+
 				clk-pins {
 					pins = "gpio48";
 					function = "blsp_spi8";
@@ -2280,6 +2288,7 @@ cpu_alert0: trip0 {
 					hysteresis = <2000>;
 					type = "passive";
 				};
+
 				cpu_crit0: trip1 {
 					temperature = <110000>;
 					hysteresis = <2000>;
@@ -2300,6 +2309,7 @@ cpu_alert1: trip0 {
 					hysteresis = <2000>;
 					type = "passive";
 				};
+
 				cpu_crit1: trip1 {
 					temperature = <110000>;
 					hysteresis = <2000>;
@@ -2320,6 +2330,7 @@ cpu_alert2: trip0 {
 					hysteresis = <2000>;
 					type = "passive";
 				};
+
 				cpu_crit2: trip1 {
 					temperature = <110000>;
 					hysteresis = <2000>;
@@ -2340,6 +2351,7 @@ cpu_alert3: trip0 {
 					hysteresis = <2000>;
 					type = "passive";
 				};
+
 				cpu_crit3: trip1 {
 					temperature = <110000>;
 					hysteresis = <2000>;
-- 
2.43.0