[PATCH 0/5] arm64: dts: freescale: Add SMARC iMX8MP display overlays

[Ernest Van Hoecke]

This series adds device tree overlays for display accessories on the
Toradex SMARC iMX8MP with the Toradex SMARC Development Board.

This brings SMARC iMX8MP display support in line with the corresponding
Verdin overlays and makes the same Toradex accessories available with
the mainline kernel.

The series adds support for:
- DSI-to-HDMI adapter based on the Lontium LT8912B bridge
- Toradex Capacitive Touch Display 7" and 10.1" DSI variants
- Toradex Capacitive Touch Display 10.1" LVDS

The Makefile entries build the standalone overlays as DTBOs and add
ready-to-use composed DTBs for the SMARC Development Board.

The DSI-to-HDMI adapter, 10.1" DSI and 10.1" LVDS overlays were
run-tested on SMARC iMX8MP with the SMARC Development Board.

Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@xxxxxxxxxxx>
---
Ernest Van Hoecke (5):
      arm64: dts: freescale: imx8mp-toradex-smarc: Add DSI to HDMI adapter overlay
      arm64: dts: freescale: imx8mp-toradex-smarc: Add Toradex Capacitive Touch Display 10.1" DSI
      arm64: dts: freescale: imx8mp-toradex-smarc: Add on-carrier 3.3V regulator
      arm64: dts: freescale: imx8mp-toradex-smarc: Add Toradex Capacitive Touch Display 10.1" LVDS
      arm64: dts: freescale: imx8mp-toradex-smarc: Add Toradex Capacitive Touch Display 7" DSI

 arch/arm64/boot/dts/freescale/Makefile             |  16 +++
 ...x-smarc-adapter-panel-cap-touch-10inch-dsi.dtso | 123 ++++++++++++++++++++
 ...ex-smarc-adapter-panel-cap-touch-7inch-dsi.dtso | 124 +++++++++++++++++++++
 .../dts/freescale/imx8mp-toradex-smarc-dev.dts     |   7 ++
 .../imx8mp-toradex-smarc-dsi-to-hdmi.dtso          | 103 +++++++++++++++++
 ...-toradex-smarc-panel-cap-touch-10inch-lvds.dtso |  80 +++++++++++++
 6 files changed, 453 insertions(+)
---
base-commit: e7a7fb1dc235053369094c3f8afdf67fefd67983
change-id: 20260930-smarc-imx8mp-display-submit-3a128293dfec

Best regards,
-- 
Ernest Van Hoecke <ernest.vanhoecke@xxxxxxxxxxx>