[PATCH v8 01/15] media: ov8858: Extract digital gain programming
From: mauriziocasciano7
Date: Fri Oct 02 2026 - 04:20:28 EST
Move the existing packed digital-gain register programming into a
helper so clock-specific gain handling can be added separately.
This is a pure refactoring: preserve both the register packing and the
explanatory comment without changing the bytes written to the sensor.
Assisted-by: LLM sparse
Signed-off-by: Maurizio Casciano <mauriziocasciano7@xxxxxxxxx>
---
drivers/media/i2c/ov8858.c | 30 ++++++++++++++++++------------
1 file changed, 18 insertions(+), 12 deletions(-)
diff --git a/drivers/media/i2c/ov8858.c b/drivers/media/i2c/ov8858.c
index 0bfc4350a8c9..2a0e2b08b9aa 100644
--- a/drivers/media/i2c/ov8858.c
+++ b/drivers/media/i2c/ov8858.c
@@ -1524,6 +1524,23 @@ static int ov8858_enable_test_pattern(struct
ov8858 *ov8858, u32 pattern)
return ov8858_write(ov8858, OV8858_REG_TEST_PATTERN, val, NULL);
}
+static int ov8858_set_long_digital_gain(struct ov8858 *ov8858, u32 gain)
+{
+ u16 long_gain;
+
+ /*
+ * Digital gain is assembled as:
+ * 0x350a[7:0] = dgain[13:6]
+ * 0x350b[5:0] = dgain[5:0]
+ * Reassemble the control value to write it in one go.
+ */
+ long_gain = (gain & OV8858_LONG_DIGIGAIN_L_MASK) |
+ ((gain & OV8858_LONG_DIGIGAIN_H_MASK) <<
+ OV8858_LONG_DIGIGAIN_H_SHIFT);
+
+ return ov8858_write(ov8858, OV8858_REG_LONG_DIGIGAIN, long_gain, NULL);
+}
+
static int ov8858_set_ctrl(struct v4l2_ctrl *ctrl)
{
struct ov8858 *ov8858 = container_of(ctrl->handler,
@@ -1532,7 +1549,6 @@ static int ov8858_set_ctrl(struct v4l2_ctrl *ctrl)
struct i2c_client *client = v4l2_get_subdevdata(&ov8858->subdev);
struct v4l2_mbus_framefmt *format;
struct v4l2_subdev_state *state;
- u16 digi_gain;
s64 max_exp;
int ret;
@@ -1571,17 +1587,7 @@ static int ov8858_set_ctrl(struct v4l2_ctrl *ctrl)
ctrl->val, NULL);
break;
case V4L2_CID_DIGITAL_GAIN:
- /*
- * Digital gain is assembled as:
- * 0x350a[7:0] = dgain[13:6]
- * 0x350b[5:0] = dgain[5:0]
- * Reassemble the control value to write it in one go.
- */
- digi_gain = (ctrl->val & OV8858_LONG_DIGIGAIN_L_MASK)
- | ((ctrl->val & OV8858_LONG_DIGIGAIN_H_MASK) <<
- OV8858_LONG_DIGIGAIN_H_SHIFT);
- ret = ov8858_write(ov8858, OV8858_REG_LONG_DIGIGAIN,
- digi_gain, NULL);
+ ret = ov8858_set_long_digital_gain(ov8858, ctrl->val);
break;
case V4L2_CID_VBLANK:
ret = ov8858_write(ov8858, OV8858_REG_VTS,
--
2.53.0
On Fri, 02 Oct 2026 01:15:55 -0700, mauriziocasciano7@xxxxxxxxx wrote:
> Add camera support for the Lenovo Yoga Book YB1-X91L. The tablet uses
> an AtomISP ISP2401 with an OV2740 front sensor, an OV8858 rear sensor
> and a WV517S rear-camera lens actuator.
>
> The series adds the missing ACPI and bridge configuration, selects the
> OV2740 link frequency through the existing IPU PCI-ID mechanism, derives
> AtomISP CSI-2 timing from the sensor link frequency, enables raw Bayer
> capture and adds the sensor controls and actuator driver needed by the
> hardware.
>
> Runtime validation used the same 15-patch content on the current
> media_stage.git master. The final media-committers.git next rebase changes
> only three source line wraps needed by the media 80-column check:
>
> - W=1 builds and sparse builds of all eight affected objects passed both
> before and after the rebase.
> - A full x86_64 Debian binary package build passed and produced kernel
> 7.3.0-rc1-yogabook-media-v8-20261002-001605.
> - The kernel booted on a Lenovo Yoga Book YB1-X91L with AtomISP PCI ID
> 8086:22b8. OV2740 negotiated 288 MHz and OV8858 negotiated 360 MHz;
> both sensors bound and AtomISP registered two cameras.
> - OV8858 digital, red and blue gains were changed during streaming and
> read back correctly. Continuous raw capture produced changing frames
> from both sensors (6/8 unique rear samples and 8/8 unique front
> samples), including front-to-rear-to-front switching without OV8858,
> I2C or CSI errors.
> - Both front and rear cameras were also exercised successfully with
> Cheese.
> - v4l2-compliance 1.32.0 completed 47 tests on the AtomISP capture node:
> 40 succeeded and 7 failed in invalid-ioctl, multiple-open, input,
> control enumeration, stream-parameter and buffer tests. These failures
> remain a validation limitation; this series does not claim to make the
> staging AtomISP driver fully compliant.
>
> Only the Yoga Book 19.2 MHz OV8858 path was hardware-tested; the existing
> 24 MHz paths received build and static-analysis coverage but were not
> tested on separate hardware.
>
> ---
> Changes in v8:
>
> - Keep patch 2's commit message focused on the implementation, remove the
> invalid review Link and move runtime results to this cover letter.
> - Express OV8858 frequencies with HZ_PER_MHZ/HZ_PER_KHZ, name clock
> tables by their input and link frequencies, and remove platform names
> from the sensor driver.
> - Explain that V4L2 exposes standard red and blue balance controls but no
> standard green-balance control, so green remains the unity reference.
> - Replace the per-sensor link-frequency override with the IPU bridge's
> existing PCI-ID matching mechanism. Add an 8086:22b8-specific OV2740
> 288 MHz entry before the generic 360 MHz fallback. This removes the
> associated AtomISP hand-off patch and reduces the series to 15 patches.
> - Add the introducing commit to the OV2740 group-hold fix and mark it for
> stable backporting.
> - Use the documented Assisted-by tag syntax.
> - Keep the padding helper as a normal static function and avoid a
> single-use raw-format descriptor structure.
> - Retain Andy's Reviewed-by tags only where the corresponding patches did
> not change materially. In particular, drop the tag from the redesigned
> IPU bridge frequency patch.
>
> v7: https://lore.kernel.org/linux-media/cover.1788360629.git.mauriziocasciano7@xxxxxxxxx/
>
> Maurizio Casciano (15):
> media: ov8858: Extract digital gain programming
> media: ov8858: support 19.2 MHz clock and manual white balance
> media: ov2740: Use C99 initializers for ACPI IDs
> media: ov2740: Add OVTI2740 ACPI ID
> media: ov8858: Add INT3477 ACPI ID
> media: intel: ipu-bridge: Add Yoga Book camera sensors
> media: atomisp: Add Yoga Book camera configuration
> media: ov2740: support 288 MHz link frequency
> media: intel: ipu-bridge: select OV2740 frequency by IPU ID
> media: atomisp: derive CSI-2 timing from sensor link frequency
> media: ov2740: release group hold after gain write errors
> media: ov2740: add manual white balance controls
> media: atomisp: Use struct v4l2_area for padding
> media: atomisp: allow raw Bayer capture
> media: i2c: Add WV517S lens actuator driver
>
> MAINTAINERS | 1 +
> drivers/media/i2c/Kconfig | 11 +
> drivers/media/i2c/Makefile | 1 +
> drivers/media/i2c/ov2740.c | 114 +++++++--
> drivers/media/i2c/ov8858.c | 221 ++++++++++++++----
> drivers/media/i2c/wv517s.c | 208 +++++++++++++++++
> drivers/media/pci/intel/ipu-bridge.c | 13 ++
> .../staging/media/atomisp/pci/atomisp_cmd.c | 81 ++++---
> .../staging/media/atomisp/pci/atomisp_cmd.h | 6 +-
> .../staging/media/atomisp/pci/atomisp_csi2.c | 20 +-
> .../media/atomisp/pci/atomisp_csi2_bridge.c | 19 +-
> .../staging/media/atomisp/pci/atomisp_ioctl.c | 32 ++-
> .../media/atomisp/pci/atomisp_subdev.c | 4 +-
> .../media/atomisp/pci/atomisp_subdev.h | 3 +-
> 14 files changed, 605 insertions(+), 129 deletions(-)
> create mode 100644 drivers/media/i2c/wv517s.c
>
>
> base-commit: 4a069a763e8a86821edac4159f7c59a20015631b
>
> With Best Regards,
> Maurizio Casciano
> --
> 2.53.0