[PATCH v10 06/15] media: intel: ipu-bridge: Add Yoga Book camera sensors

[Maurizio Casciano via B4 Relay]

From: Maurizio Casciano <mauriziocasciano7@xxxxxxxxx>

The Yoga Book YB1-X91 uses INT3477 for its OV8858 rear sensor and
OVTI2740 for its OV2740 front sensor. Add link frequencies consumed by
the sensor drivers when the IPU bridge constructs software endpoints.

This supplies endpoint data only; it does not establish that either
sensor can stream on the Yoga Book hardware.

Signed-off-by: Maurizio Casciano <mauriziocasciano7@xxxxxxxxx>
Assisted-by: LLM sparse
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
---
 drivers/media/pci/intel/ipu-bridge.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/media/pci/intel/ipu-bridge.c b/drivers/media/pci/intel/ipu-bridge.c
index 8bd20089636e..62852fe1a406 100644
--- a/drivers/media/pci/intel/ipu-bridge.c
+++ b/drivers/media/pci/intel/ipu-bridge.c
@@ -78,6 +78,8 @@ static const struct ipu_sensor_config ipu_supported_sensors[] = {
 	IPU_SENSOR_CONFIG("INT33F0", 1, 384000000),
 	/* Omnivision OV2740 */
 	IPU_SENSOR_CONFIG("INT3474", 1, 180000000),
+	/* Omnivision OV8858 */
+	IPU_SENSOR_CONFIG("INT3477", 1, 360000000),
 	/* Omnivision OV5670 */
 	IPU_SENSOR_CONFIG("INT3479", 1, 422400000),
 	/* Omnivision OV8865 */
@@ -109,6 +111,8 @@ static const struct ipu_sensor_config ipu_supported_sensors[] = {
 	IPU_SENSOR_CONFIG("OVTIDB10", 1, 560000000),
 	/* Omnivision OV2680 */
 	IPU_SENSOR_CONFIG("OVTI2680", 1, 331200000),
+	/* Omnivision OV2740 */
+	IPU_SENSOR_CONFIG("OVTI2740", 1, 360000000),
 	/* Omnivision OV5675 */
 	IPU_SENSOR_CONFIG("OVTI5675", 1, 450000000),
 	/* Omnivision OV5693 */

-- 
2.53.0