[PATCH v2 5/5] ARM: dts: axis: artpec6: add more blank lines

[Henrik Grimler]

The status property, and each child node, should preferably have empty
lines before them to increase readability. dt-check-style in strict
mode reports this type of issue as:

  axis/artpec6.dtsi:186: [required-blank-lines] "status" must be preceded by a blank line

Fix all occurences.

Signed-off-by: Henrik Grimler <henrik.grimler@xxxxxxxx>
---
 arch/arm/boot/dts/axis/artpec6-devboard.dts |  1 +
 arch/arm/boot/dts/axis/artpec6.dtsi         | 14 ++++++++++++++
 2 files changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/axis/artpec6-devboard.dts b/arch/arm/boot/dts/axis/artpec6-devboard.dts
index 9a91f9758442..55fdd610d3ed 100644
--- a/arch/arm/boot/dts/axis/artpec6-devboard.dts
+++ b/arch/arm/boot/dts/axis/artpec6-devboard.dts
@@ -55,6 +55,7 @@ mdio {
 		compatible = "snps,dwmac-mdio";
 		#address-cells = <0x1>;
 		#size-cells = <0x0>;
+
 		phy1: phy@0 {
 			device_type = "ethernet-phy";
 			compatible = "ethernet-phy-ieee802.3-c22";
diff --git a/arch/arm/boot/dts/axis/artpec6.dtsi b/arch/arm/boot/dts/axis/artpec6.dtsi
index 6e69cde0a609..c9f671fd685a 100644
--- a/arch/arm/boot/dts/axis/artpec6.dtsi
+++ b/arch/arm/boot/dts/axis/artpec6.dtsi
@@ -120,6 +120,7 @@ timer@faf00600 {
 		reg = <0xfaf00600 0x20>;
 		interrupts = <GIC_PPI 13 0xf04>;
 		clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>;
+
 		status = "disabled";
 	};
 
@@ -181,6 +182,7 @@ pcie: pcie@f8050000 {
 				<0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
 				<0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 		axis,syscon-pcie = <&syscon>;
+
 		status = "disabled";
 	};
 
@@ -195,6 +197,7 @@ pcie_ep: pcie-ep@f8050000 {
 		num-ob-windows = <2>;
 		num-lanes = <2>;
 		axis,syscon-pcie = <&syscon>;
+
 		status = "disabled";
 	};
 
@@ -207,16 +210,19 @@ pinctrl_uart0: uart0grp {
 			groups = "uart0grp2";
 			bias-pull-up;
 		};
+
 		pinctrl_uart1: uart1grp {
 			function = "uart1";
 			groups = "uart1grp0";
 			bias-pull-up;
 		};
+
 		pinctrl_uart2: uart2grp {
 			function = "uart2";
 			groups = "uart2grp1";
 			bias-pull-up;
 		};
+
 		pinctrl_uart3: uart3grp {
 			function = "uart3";
 			groups = "uart3grp0";
@@ -259,6 +265,7 @@ dma0: dma@f8019000 {
 			dma-channels = <8>;
 			dma-requests = <8>;
 		};
+
 		dma1: dma@f8019400 {
 			compatible = "renesas,nbpfaxi64dmac8b16";
 			reg = <0xf8019400 0x400>;
@@ -338,8 +345,10 @@ uart0: serial@f8036000 {
 			dmas = <&dma0 4 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
 			       <&dma0 5 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
 			dma-names = "rx", "tx";
+
 			status = "disabled";
 		};
+
 		uart1: serial@f8037000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xf8037000 0x1000>;
@@ -352,8 +361,10 @@ uart1: serial@f8037000 {
 			dmas = <&dma0 6 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
 			       <&dma0 7 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
 			dma-names = "rx", "tx";
+
 			status = "disabled";
 		};
+
 		uart2: serial@f8038000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xf8038000 0x1000>;
@@ -366,8 +377,10 @@ uart2: serial@f8038000 {
 			dmas = <&dma1 0 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
 			       <&dma1 1 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
 			dma-names = "rx", "tx";
+
 			status = "disabled";
 		};
+
 		uart3: serial@f8039000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xf8039000 0x1000>;
@@ -380,6 +393,7 @@ uart3: serial@f8039000 {
 			dmas = <&dma1 2 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
 			       <&dma1 3 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
 			dma-names = "rx", "tx";
+
 			status = "disabled";
 		};
 	};

-- 
2.43.0