[PATCH v2 3/5] ARM: dts: axis: artpec6: use multiple tuples in regs and ranges

[Henrik Grimler]

When #size-cells > 1 it is preferred to have each entry as its own
tuple, to make it easier to identify addresses and sizes. Update
artpec6.dtsi to use preferred style to increase readability.

While at it, also move the inline comments in the pcie node to the
same lines as the entries and shorten one of them a bit to fit under
100 chars.

These changes fix indent-consistent and continuation-alignment
warnings from dt-check-style in strict mode, e.g. warnings like:

  axis/artpec6.dtsi:170: [indent-consistent] indent mismatch (expected depth 2 * '\t')
  axis/artpec6.dtsi:172: [continuation-alignment] continuation should align to column 26 (to < or ")

Signed-off-by: Henrik Grimler <henrik.grimler@xxxxxxxx>
---
 arch/arm/boot/dts/axis/artpec6.dtsi | 20 +++++++++-----------
 1 file changed, 9 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/axis/artpec6.dtsi b/arch/arm/boot/dts/axis/artpec6.dtsi
index d6610f62ca25..2f75a9df0963 100644
--- a/arch/arm/boot/dts/axis/artpec6.dtsi
+++ b/arch/arm/boot/dts/axis/artpec6.dtsi
@@ -161,17 +161,15 @@ pmu {
 	 */
 	pcie: pcie@f8050000 {
 		compatible = "axis,artpec6-pcie", "snps,dw-pcie";
-		reg = <0xf8050000 0x2000
-		       0xf8040000 0x1000
-		       0xc0000000 0x2000>;
+		reg = <0xf8050000 0x2000>,
+		      <0xf8040000 0x1000>,
+		      <0xc0000000 0x2000>;
 		reg-names = "dbi", "phy", "config";
 		#address-cells = <3>;
 		#size-cells = <2>;
 		device_type = "pci";
-			  /* downstream I/O */
-		ranges = <0x81000000 0 0 0xc0002000 0 0x00010000
-			  /* non-prefetchable memory */
-			  0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>;
+		ranges = <0x81000000 0 0 0xc0002000 0 0x00010000>,          /* downstream I/O */
+			 <0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>; /* non-prefetchable */
 		num-lanes = <2>;
 		bus-range = <0x00 0xff>;
 		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
@@ -188,10 +186,10 @@ pcie: pcie@f8050000 {
 
 	pcie_ep: pcie-ep@f8050000 {
 		compatible = "axis,artpec6-pcie-ep", "snps,dw-pcie";
-		reg = <0xf8050000 0x2000
-		       0xf8051000 0x2000
-		       0xf8040000 0x1000
-		       0xc0000000 0x20000000>;
+		reg = <0xf8050000 0x2000>,
+		      <0xf8051000 0x2000>,
+		      <0xf8040000 0x1000>,
+		      <0xc0000000 0x20000000>;
 		reg-names = "dbi", "dbi2", "phy", "addr_space";
 		num-ib-windows = <6>;
 		num-ob-windows = <2>;

-- 
2.43.0