[PATCH v5 4/6] iio: imu: inv_icm42607: Add support for ICM-42370-P

[Kanak Shilledar]

Add support for the Invensense ICM-42370-P MEMS MotionTracking 3-axis
accelerometer with built-in temperature sensor. This device is almost
identical to the existing Invensense ICM-42607-P IMU, but lacks
gyroscope. The device supports I2C, SPI and I3C. Implement only I2C
support for now, and provide support for raw sensor reads via sysfs.
There is also a built-in temperature sensor but it can not be turned off
similar to the ICM-42607.

While at it, change so dev_err_probe() is returned
when the WHO_AM_I read fails.

Datasheet: https://www.invensense.tdk.com/en-us/products/3-axis/icm-42370-p
Signed-off-by: Kanak Shilledar <kanak.shilledar@xxxxxxxx>
---
 drivers/iio/imu/inv_icm42607/inv_icm42607.h      |  2 ++
 drivers/iio/imu/inv_icm42607/inv_icm42607_core.c | 24 ++++++++++++++++++++++--
 drivers/iio/imu/inv_icm42607/inv_icm42607_i2c.c  |  6 ++++++
 3 files changed, 30 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607.h b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
index e4075288247b8..ca5f59eb436c0 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607.h
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
@@ -367,6 +367,7 @@ struct inv_icm42607_sensor_state {
 #define INV_ICM42607_REG_FIFO_DATA			0x3F
 
 #define INV_ICM42607_REG_WHOAMI				0x75
+#define INV_ICM42370P_WHOAMI				0x0D
 #define INV_ICM42607P_WHOAMI				0x60
 #define INV_ICM42607_WHOAMI				0x67
 
@@ -393,6 +394,7 @@ typedef int (*inv_icm42607_bus_setup)(struct inv_icm42607_state *);
 extern const struct regmap_config inv_icm42607_regmap_config;
 extern const struct inv_icm42607_hw inv_icm42607_hw_data;
 extern const struct inv_icm42607_hw inv_icm42607p_hw_data;
+extern const struct inv_icm42607_hw inv_icm42370p_hw_data;
 extern const struct dev_pm_ops inv_icm42607_pm_ops;
 
 const struct iio_mount_matrix *
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
index d974cba66e1be..87b1499a3689f 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
@@ -92,6 +92,22 @@ static const struct inv_icm42607_conf inv_icm42607_default_conf = {
 	},
 };
 
+static const struct inv_icm42607_conf inv_icm42370_default_conf = {
+	.accel = {
+		.mode = INV_ICM42607_SENSOR_MODE_OFF,
+		.fs = INV_ICM42607_ACCEL_FS_4G,
+		.odr = INV_ICM42607_ODR_100HZ,
+		.filter = INV_ICM42607_FILTER_BW_25HZ,
+	},
+};
+
+const struct inv_icm42607_hw inv_icm42370p_hw_data = {
+	.whoami = INV_ICM42370P_WHOAMI,
+	.name = "icm42370p",
+	.conf = &inv_icm42370_default_conf,
+};
+EXPORT_SYMBOL_NS_GPL(inv_icm42370p_hw_data, "IIO_ICM42607");
+
 const struct inv_icm42607_hw inv_icm42607_hw_data = {
 	.whoami = INV_ICM42607_WHOAMI,
 	.name = "icm42607",
@@ -476,7 +492,7 @@ static int inv_icm42607_setup(struct inv_icm42607_state *st,
 
 	ret = regmap_read(st->map, INV_ICM42607_REG_WHOAMI, &val);
 	if (ret)
-		return ret;
+		return dev_err_probe(dev, ret, "WHOAMI read failed\n");
 
 	/* Warn, but don't fail. */
 	if (val != st->hw->whoami)
@@ -638,7 +654,11 @@ int inv_icm42607_core_probe(struct regmap *regmap,
 	pm_runtime_set_autosuspend_delay(dev, INV_ICM42607_SUSPEND_DELAY_MS);
 	pm_runtime_use_autosuspend(dev);
 
-	/* Initialize IIO device for Accel */
+	/*
+	 * Invensense, ICM42607 and ICM42607P both have accelerometer
+	 * and gyroscope functionality. Whereas, Invensense, ICM42370P
+	 * has only accelerometer.
+	 */
 	st->indio_accel = inv_icm42607_accel_init(st);
 	if (IS_ERR(st->indio_accel))
 		return PTR_ERR(st->indio_accel);
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_i2c.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_i2c.c
index e903106af84a8..cfafba2e3e68e 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607_i2c.c
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_i2c.c
@@ -63,6 +63,9 @@ static const struct i2c_device_id inv_icm42607_id[] = {
 	}, {
 		.name = "icm42607p",
 		.driver_data = (kernel_ulong_t)&inv_icm42607p_hw_data,
+	}, {
+		.name = "icm42370p",
+		.driver_data = (kernel_ulong_t)&inv_icm42370p_hw_data,
 	},
 	{ }
 };
@@ -75,6 +78,9 @@ static const struct of_device_id inv_icm42607_of_matches[] = {
 	}, {
 		.compatible = "invensense,icm42607p",
 		.data = &inv_icm42607p_hw_data,
+	}, {
+		.compatible = "invensense,icm42370p",
+		.data = &inv_icm42370p_hw_data,
 	},
 	{ }
 };

-- 
2.43.0