[PATCH v2 1/2] soc: fsl: dpio: Fix cleanup on IRQ registration failure

[Myeonghun Pak]

IRQ registration happens after dpaa2_io_create(), but its failure path
only releases the IRQ resources and the MC portal. The I/O object stays
allocated and published in the service list and per-CPU lookup table,
while devres unmaps its portal registers after probe fails.

Call dpaa2_io_down() on IRQ registration failure to remove the object
from those lookup structures and free it. Reorder the error labels so
that a failed dpaa2_io_create() still skips this cleanup.

Remove unregister_dpio_irq_handlers() from the probe error path, since
no IRQ handler or affinity hint has been installed when registration
fails.

This issue was identified during our ongoing static-analysis research
while reviewing kernel code.

Fixes: fe8fe7723a3a ("soc: fsl: dpio: register dpio irq handlers after dpio create")
Cc: stable@xxxxxxxxxxxxxxx
Assisted-by: LLM
Co-developed-by: Ijae Kim <ae878000@xxxxxxxxx>
Signed-off-by: Ijae Kim <ae878000@xxxxxxxxx>
Signed-off-by: Myeonghun Pak <mhun512@xxxxxxxxx>
---
Changes in v2:
- Remove the unnecessary unregister_dpio_irq_handlers() call from
  the probe error path, as suggested by Ioana Ciornei.
- Include this fix as patch 1 of the two-patch DPIO cleanup series.
- Add Cc: stable@xxxxxxxxxxxxxxx.

 drivers/soc/fsl/dpio/dpio-driver.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/fsl/dpio/dpio-driver.c b/drivers/soc/fsl/dpio/dpio-driver.c
index d5198ff..8d31346 100644
--- a/drivers/soc/fsl/dpio/dpio-driver.c
+++ b/drivers/soc/fsl/dpio/dpio-driver.c
@@ -244,9 +244,9 @@ static int dpaa2_dpio_probe(struct fsl_mc_device *dpio_dev)
 
 	return 0;
 
-err_dpaa2_io_create:
-	unregister_dpio_irq_handlers(dpio_dev);
 err_register_dpio_irq:
+	dpaa2_io_down(priv->io);
+err_dpaa2_io_create:
 	fsl_mc_free_irqs(dpio_dev);
 err_allocate_irqs:
 	dpio_disable(dpio_dev->mc_io, 0, dpio_dev->mc_handle);
-- 
2.53.0