[PATCH RFC 1/3] dt-bindings: net: wireless: qcom,ath12k: add disable-rfkill

[Franz]

Some boards do not wire the WCN7850 hardware rfkill input, or wire it so
that it always reads as "radio off". On the Microsoft Surface Pro 11
(X1E80100), ath12k enables hardware rfkill handling and the interface
ends up hard-blocked for good.

ACPI platforms can already turn this off through a firmware setting
that ath12k reads (ath12k_acpi_get_disable_rfkill()). Add a boolean
property so that DT-based boards can describe the same thing.

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Franz <franzelfranzel@xxxxxxxxx>
---
 .../devicetree/bindings/net/wireless/qcom,ath12k.yaml      | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath12k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath12k.yaml
index dc68dd599..d56050e77 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath12k.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath12k.yaml
@@ -27,6 +27,13 @@ properties:
       If present, a board or platform specific string used to lookup
       usecase-specific firmware files for the device.
 
+  disable-rfkill:
+    type: boolean
+    description:
+      The device's hardware rfkill input is not usable on this board (for
+      example, it is not wired and reads as "radio off"). The driver must
+      not enable hardware rfkill handling.
+
   vddaon-supply:
     description: VDD_AON supply regulator handle
 
-- 
2.56.0