Re: [PATCH 0/2] phy: mediatek: xsphy: add eUSB2 repeater support for USB2 ports

[Vinod Koul]

On Wed, 26 Aug 2026 14:38:34 +0200, Julien Massot wrote:
> Some USB2 PHY ports are connected to an external eUSB2 repeater chip
> that sits between the PHY and the USB connector. To support such
> configurations, this series adds an optional phys property to the
> MediaTek xsphy port sub-node and integrates the repeater into the USB2
> PHY init, exit and mode handling.
> 
> The binding follows the same pattern as the Synopsys eUSB2 PHY, which
> already uses a phys property at the sub-node level to reference an
> external repeater. The driver change similarly manages the repeater PHY
> alongside the MediaTek USB2 PHY.
> 
> [...]

Applied, thanks!

[1/2] dt-bindings: phy: mediatek,xsphy: add optional repeater phys property
      commit: e95b476302852ac1fb5bffaa824ac2cd35178e58
[2/2] phy: mediatek: xsphy: add optional repeater support for USB2 ports
      commit: bda1af7b177a94f6d169f0b359c61e7a7d39a36e

Best regards,
-- 
~Vinod