[PATCH 0/2] Add Samsung Galaxy Tab S9 Wi-Fi (SM-X710) support

[nacht20-de via B4 Relay]

Add devicetree support for the Samsung Galaxy Tab S9 Wi-Fi (SM-X710),
an SM8550 tablet. Two patches: the qcom.yaml board entry and the board
DTS describing UFS, microSD, USB 2.0 peripheral via eUSB2 with an NXP
PTN3222 repeater, keys, GPU, video decoder, ADSP and the CS35L45/VA-macro
audio path.

Tested on hardware on top of linux-next next-20261002 (boots to a shell
through U-Boot): storage, USB gadget, framebuffer console, keys including
the book-cover switch, CPU frequency scaling, GPU firmware and render
node, video decoder node, and the ADSP/audio probe chain. The microSD
slot is described but not yet tested, and audio playback/capture was not
exercised. The wireless module needs additional power sequencing and
follows as a separate series.

---
nacht20-de (2):
      dt-bindings: arm: qcom: Add Samsung Galaxy Tab S9 Wi-Fi
      arm64: dts: qcom: sm8550: Add support for Samsung Galaxy Tab S9 Wi-Fi

 Documentation/devicetree/bindings/arm/qcom.yaml    |   1 +
 arch/arm64/boot/dts/qcom/Makefile                  |   1 +
 .../boot/dts/qcom/sm8550-samsung-gts9wifi.dts      | 664 +++++++++++++++++++++
 3 files changed, 666 insertions(+)
---
base-commit: f0406245cb9855e6318335a8a223551354291a46
change-id: 20261004-gts9wifi-dts-d2472e895234

Best regards,
-- 
nacht20-de <nacht@xxxxxxxxxx>