[PATCH nf-next v3 3/3] selftests: netfilter: nft_flowtable.sh: check the priority a flow carries

[Julius Bairaktaris]

Count the forwarded TCP packets that leave with priority 0:3 and those
that leave with none, first without a priority and then with "meta
priority set 0:3" ahead of "flow add". With the priority set, every
packet must carry it, including those the flowtable forwards. Runs for
IPv4 and IPv6.

Assisted-by: Claude:claude-fable-5-1
Signed-off-by: Julius Bairaktaris <julius@xxxxxxxxxxxxxx>
---
 .../selftests/net/netfilter/nft_flowtable.sh  | 110 ++++++++++++++++++
 1 file changed, 110 insertions(+)

diff --git a/tools/testing/selftests/net/netfilter/nft_flowtable.sh b/tools/testing/selftests/net/netfilter/nft_flowtable.sh
index 449c518bd947..73c7b1ec2208 100755
--- a/tools/testing/selftests/net/netfilter/nft_flowtable.sh
+++ b/tools/testing/selftests/net/netfilter/nft_flowtable.sh
@@ -458,6 +458,106 @@ fi
 	check_dscp "dscp_fwd" "$pmtu"
 }
 
+check_priority()
+{
+	local what="$1"
+	local pmtu="$2"
+	local ok=1
+
+	local counter
+	counter=$(ip netns exec "$nsr1" nft reset counter netdev priocheck prio3 | grep packets)
+	local pc3=${counter%*bytes*}
+	pc3=${pc3#*packets}
+
+	counter=$(ip netns exec "$nsr1" nft reset counter netdev priocheck prio0 | grep packets)
+	local pc0=${counter%*bytes*}
+	pc0=${pc0#*packets}
+
+	local failmsg="FAIL: pmtu $pmtu: $what counters do not match, expected"
+
+	case "$what" in
+	"prio_none")
+		if [ "$pc3" -gt 0 ] || [ "$pc0" -eq 0 ]; then
+			echo "$failmsg prio3 == 0, prio0 > 0, but got $pc3,$pc0" 1>&2
+			ret=1
+			ok=0
+		fi
+		;;
+	"prio_fwd")
+		if [ "$pc3" -eq 0 ] || [ "$pc0" -gt 0 ]; then
+			echo "$failmsg prio3 > 0, prio0 == 0, but got $pc3,$pc0" 1>&2
+			ret=1
+			ok=0
+		fi
+		;;
+	*)
+		echo "FAIL: pmtu $pmtu: unknown priority check $what" 1>&2
+		ret=1
+		ok=0
+	esac
+
+	if [ "$ok" -eq 1 ] ;then
+		echo "PASS: $what: priority packet counters match"
+	fi
+}
+
+test_tcp_forwarding_set_priority()
+{
+	local pmtu="$3"
+	local proto="$4"
+	local dstip="$5"
+	local dstport="$6"
+	local lret=0
+
+ip netns exec "$nsr1" nft -f - <<EOF
+table netdev priocheck {
+   counter prio0 { }
+   counter prio3 { }
+
+   chain egress0 {
+      type filter hook egress device "veth0" priority 0; policy accept
+      meta l4proto tcp meta priority 0:3 counter name "prio3"
+      meta l4proto tcp meta priority none counter name "prio0"
+   }
+
+   chain egress1 {
+      type filter hook egress device "veth1" priority 0; policy accept
+      meta l4proto tcp meta priority 0:3 counter name "prio3"
+      meta l4proto tcp meta priority none counter name "prio0"
+   }
+}
+EOF
+	if [ $? -ne 0 ]; then
+		echo "SKIP: Could not load netdev:egress for veth0 and veth1"
+		return 0
+	fi
+
+	if ! test_tcp_forwarding_ip "$1" "$2" "$pmtu" "$proto" "$dstip" "$dstport"; then
+		lret=1
+	fi
+	check_priority "prio_none" "$pmtu"
+
+	# The flow stores the priority set before it is added, so the packets
+	# the flowtable forwards leave with it too, in both directions.
+ip netns exec "$nsr1" nft -f - <<EOF
+table inet prioset {
+   chain forward {
+      type filter hook forward priority -1; policy accept
+      meta priority set 0:3
+   }
+}
+EOF
+	if ! test_tcp_forwarding_ip "$1" "$2" "$pmtu" "$proto" "$dstip" "$dstport"; then
+		lret=1
+	fi
+	check_priority "prio_fwd" "$pmtu"
+
+	ip netns exec "$nsr1" nft delete table inet prioset
+	ip netns exec "$nsr1" nft delete table netdev priocheck
+
+	return $lret
+}
+
 test_tcp_forwarding_nat()
 {
 	local nsa="$1"
@@ -516,6 +616,11 @@ else
 	ret=1
 fi
 
+if ! test_tcp_forwarding_set_priority "$ns1" "$ns2" 0 6 "[dead:2::99]" 12345; then
+	echo "FAIL: IPv6 flow offload for ns1/ns2 with priority update" 1>&2
+	ret=1
+fi
+
 # delete default route, i.e. ns2 won't be able to reach ns1 and
 # will depend on ns1 being masqueraded in nsr1.
 # expect ns1 has nsr1 address.
@@ -572,6 +677,11 @@ if ! test_tcp_forwarding_set_dscp "$ns1" "$ns2" 1 4 10.0.2.99 12345; then
 	exit 0
 fi
 
+if ! test_tcp_forwarding_set_priority "$ns1" "$ns2" 1 4 10.0.2.99 12345; then
+	echo "FAIL: flow offload for ns1/ns2 with priority update and pmtu discovery" 1>&2
+	ret=1
+fi
+
 ip netns exec "$nsr1" nft reset counters table inet filter >/dev/null
 
 if ! test_tcp_forwarding_nat "$ns1" "$ns2" 1 ""; then
-- 
2.53.0