[PATCH 11/74] media: qcom: camss: Fix invalid declaration of PIX for SDM670

[bod]

From: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>

line_num is declarative of the number and type of data-interfaces a VFE
has in CAMSS. The fourth line on full VFEs is reserved to the "PIX" path -
meaning the path that can do YUV, downscaling, stats, params or some
version of that.

In contrast the raw dump interfaces (RDI) 0, 1, 2 can only write
unformatted pixel-data and cannot generate stats.

The PIX path lives at a different register offset and has significantly
different setup to RDI.

VFE Lite has four RDI interfaces where VFE (full) has three RDI and one PIX
interface.

Unless/until PIX is actually implemented for SDM670 reduce line_num to
three to stop populating a pix path which simply isn't implemented.

Fixes: c52643b24152 ("media: qcom: camss: add support for SDM670 camss")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
 drivers/media/platform/qcom/camss/camss.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 40a993ade5f6d..f46ad1db6dbbe 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -1202,7 +1202,7 @@ static const struct camss_subdev_resources vfe_res_670[] = {
 		.reg = { "vfe0" },
 		.interrupt = { "vfe0" },
 		.vfe = {
-			.line_num = 4,
+			.line_num = 3,
 			.has_pd = true,
 			.pd_name = "ife0",
 			.hw_ops = &vfe_ops_170,
@@ -1224,7 +1224,7 @@ static const struct camss_subdev_resources vfe_res_670[] = {
 		.reg = { "vfe1" },
 		.interrupt = { "vfe1" },
 		.vfe = {
-			.line_num = 4,
+			.line_num = 3,
 			.has_pd = true,
 			.pd_name = "ife1",
 			.hw_ops = &vfe_ops_170,

-- 
2.55.0