[PATCH v2 3/3] arm64: dts: qcom: qcs6490-rb3gen2: add the clock controller

[Alex Elder]

The clock controller within the TC9564 SoC is accessed via a PCI
endpoint bus through BAR 4 of the first embedded PCIe function.
A syscon node is created to provide access to a range of memory
that is used by the clock controller and shared with other devices.

Co-developed-by: Daniel Thompson <daniel@xxxxxxxxxxxx>
Signed-off-by: Daniel Thompson <daniel@xxxxxxxxxxxx>
Signed-off-by: Alex Elder <elder@xxxxxxxxxxxx>
---
v2: - Moved the clock devicetree node to be a peer (rather than a child) of
      the syscon node

 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index 0e3bbdaf4661f..06246d185b50f 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -9,6 +9,7 @@
 #define PM7250B_SID 8
 #define PM7250B_SID1 9
 
+#include <dt-bindings/clock/toshiba,tc9564.h>
 #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
 #include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
 #include <dt-bindings/leds/common.h>
@@ -961,7 +962,7 @@ dev@0,0 {
 				#size-cells = <2>;
 				ranges;	/* This will be updated dynamically */
 
-				pci-ep-bus@4 {
+				pcie_s1b5d0f0_bar4_bus: pci-ep-bus@4 {
 					compatible = "simple-bus";
 					#address-cells = <1>;
 					#size-cells = <1>;
@@ -989,6 +990,19 @@ pci-ep-bus@4 {
 	};
 };
 
+&pcie_s1b5d0f0_bar4_bus {
+	tc9564_config_syscon0: syscon@0 {
+		compatible = "syscon";
+		reg = <0x0 0x2000>;
+	};
+
+	tc9564_clock0: clock {
+		compatible = "toshiba,tc9564-clock";
+		toshiba,config-syscon = <&tc9564_config_syscon0>;
+		#clock-cells = <1>;
+	};
+};
+
 &pm7325_gpios {
 	kypd_vol_up_n: kypd-vol-up-n-state {
 		pins = "gpio6";
-- 
2.53.0