[PATCH v2 1/2] dt-bindings: arm: altera: add Agilex SoCDK multi-QSPI board

[genevieve . chan]

From: Genevieve Chan <genevieve.chan@xxxxxxxxxx>

The Agilex SoCDK can be fitted with a multi-QSPI daughter card in
place of the default single-flash QSPI card. The multi-QSPI card
carries four Micron MT25QU02G flashes connected to the HPS QSPI
controller on chip selects 0-3.

The different flash population requires a separate board DTS, hence, add
a board compatible for it, following the existing SoCDK variants.
The board uses the Agilex SoC (marketed as Agilex 7 F-Series), so it
falls back to "intel,socfpga-agilex".

Signed-off-by: Genevieve Chan <genevieve.chan@xxxxxxxxxx>
---
Changes in v2:
- Rename compatible from intel,socfpga-agilex7f-socdk-multiqspi to
  intel,socfpga-agilex-socdk-multiqspi.
- Describe the hardware difference in the commit message.

 Documentation/devicetree/bindings/arm/altera.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/altera.yaml b/Documentation/devicetree/bindings/arm/altera.yaml
index 5fce1161210e..01f6323b9a6b 100644
--- a/Documentation/devicetree/bindings/arm/altera.yaml
+++ b/Documentation/devicetree/bindings/arm/altera.yaml
@@ -97,6 +97,7 @@ properties:
               - intel,socfpga-agilex-n6000
               - intel,socfpga-agilex-socdk
               - intel,socfpga-agilex-socdk-emmc
+              - intel,socfpga-agilex-socdk-multiqspi
           - const: intel,socfpga-agilex
 
       - description: Agilex3 boards
-- 
2.43.7