[PATCH v3 0/2] media: rkisp1: Add YUV bypass support for rkisp1

[Alen Karnil]

Hi all, 

I am taking over the series from Isaac.

The goal is unchanged, which is allowing sensors that can
output YUV streams to be used through the rkisp1's passthrough mode.

In patch 1, the ISP mode has been replaced in two possible
paths, as my hardware configuration only goes through a csi serializer
I've only been able to test a single path (the lower else block),
so the path requires testing with hardware I do not possess. 

Cheers,
Alen Karnil

Tested on: v7.2, using OV5640, GC2145 and I.MX8MPlus
Compile-tested on: media/next

---
Changes in v3:
- Reworked patch 1, to fix incorrect logic and add comment.
- Reworded patch 2, including code comment.
- Link to v2: https://lore.kernel.org/linux-media/20260205103207.4020959-1-isaac.scott@xxxxxxxxxxxxxxxx

--
2.43.0

To: Dafna Hirschfeld <dafna@xxxxxxxxxxxx>
To: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
To: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
To: Heiko Stuebner <heiko@xxxxxxxxx>
Cc: linux-media@xxxxxxxxxxxxxxx
Cc: linux-rockchip@xxxxxxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx

---
Alen Karnil (1):
      media: rkisp1-isp: Set correct data mode for YUV bypass

Isaac Scott (1):
      media: rkisp1: Treat 8 bus width and 16 bus width formats the same

 drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)
---
base-commit: bd5f485f3f026225b86573e559af0b7254ef4184
change-id: 20260916-media-rkisp1-add-yuv-bypass-support-for-rkisp1-c881c0835b8e

Best regards,
--  
Alen Karnil <alen.karnil@xxxxxxxxxxxxxxxx>