[PATCH 0/3] phy: aspeed: Add ASPEED PCIe PHY support

[Jacky Chou]

Add the ASPEED PCIe PHY binding and driver for AST2600 and AST2700
SoCs. The PHY provides the physical layer used by the PCIe controller
when it is configured to run in root complex mode.

The driver registers an ASPEED PCIe PHY provider through the generic PHY
framework and programs the SoC-specific PEHR registers from set_mode().
For AST2600 this selects the root complex port type. For AST2700 this
also configures the posted/completion credit values, local scaling,
device type, internal reset selection, and downstream port setting
needed by the controller.

This series also adds the devicetree binding for the PHY provider and a
MAINTAINERS entry for the ASPEED PCIe PHY driver.

Signed-off-by: Jacky Chou <jacky_chou@xxxxxxxxxxxxxx>
---
Jacky Chou (3):
      dt-bindings: phy: aspeed: Add ASPEED PCIe PHY
      phy: aspeed: Add ASPEED PCIe PHY driver
      MAINTAINERS: Add ASPEED PCIe PHY driver

 .../bindings/phy/aspeed,ast2600-pcie-phy.yaml      |  49 +++++
 MAINTAINERS                                        |   8 +
 drivers/phy/aspeed/Kconfig                         |  12 +-
 drivers/phy/aspeed/Makefile                        |   1 +
 drivers/phy/aspeed/phy-aspeed-pcie.c               | 237 +++++++++++++++++++++
 5 files changed, 306 insertions(+), 1 deletion(-)
---
base-commit: ea01f446f0682a5e7bd7a275889a890b7e0c6e02
change-id: 20260630-aspeed_pcie_phy-34161b03863e

Best regards,
-- 
Jacky Chou <jacky_chou@xxxxxxxxxxxxxx>