[PATCH 0/5] usb: dwc2: fix low power issues found on stm32mp1

[Fabrice Gasnier]

This series addresses several hang, bad_irq or re-initialisation issues
found on stm32mp1 when going to system low power (stop mode):
- First two fixes can be reproduced on stm32mp13 DK board, stm32mp15 DK
  and EVAL boards.
- Subsequent fixes can be reproduced on stm32mp15 EVAL board that uses
  an external Vbus regulator and stm32 dedicated detection logic.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
---
Fabrice Gasnier (5):
      usb: dwc2: fix recovery after PM domain off
      usb: dwc2: fix a possible interrupt storm on stm32mp1
      usb: dwc2: hcd: fix possible successive vbus supply enables
      usb: dwc2: hcd: don't disable/enable external vbus by system suspend/resume
      usb: dwc2: platform: fix stm32mp15 detection logic power management

 drivers/usb/dwc2/core.c      |   1 -
 drivers/usb/dwc2/core.h      |   2 -
 drivers/usb/dwc2/core_intr.c |   6 +-
 drivers/usb/dwc2/hcd.c       |  11 +--
 drivers/usb/dwc2/platform.c  | 222 +++++++++++++++++++++----------------------
 5 files changed, 118 insertions(+), 124 deletions(-)
---
base-commit: 1a5dad490a3f8533ae955be59ac5d26a3dfb6166
change-id: 20261007-dwc2-low-power-fixes-stm32-0c1e5e68b252

Best regards,
--  
Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>