Re: [PATCH net-next 00/11] net: ethernet: qualcomm: ppe: Add support for IPQ5424 SoC

[Jie Luo]

On 10/8/2026 10:54 PM, netdev-bot+sinfo@xxxxxxxxxx wrote:
> Hi!
> 
> This is an automated message. This series looks like a fix, but its
> commit messages seem to be missing some information:
> 
>  - How the issue was discovered, e.g. hit in production, hit during
>    development, syzbot report, manual code inspection, LLM or static
>    analysis tool scan.
> 
>  - Whether the issue was actually triggered, or is only theoretical
>    (e.g. found by code inspection). If it was triggered please include
>    the symptoms, like the stack trace or error messages.
> 
>  - What hardware the change was tested on. For driver fixes please
>    mention the device (and if relevant firmware version) used for
>    testing, or say that the change was not tested on real hardware.
> 
> Please do not repost the series just to address the above. Instead,
> reply to this email with the missing information, so that reviewers
> can take it into account. If the series needs another revision for
> other reasons, please include the information in the commit messages
> then.
> 
> The evaluation is done by an LLM so it may be wrong, if you think
> that is the case please reply and explain.

Both issues are theoretical. Neither was hit in production or reported
by users.

Patch 1 (dt-bindings: Split EDMA reset into sys and apb): [found by
manual code inspection while developing the IPQ524 PPE driver]. EDMA
driver is not upstream yet, and no in-tree device tree uses the
ethernet-dma node, so the issue cannot be triggered today.

Patch 2 (ppe: Fix multicast queue config table index): found by the code
inspection. It was not seen as a crash or an error message; [the
multicast queue thresholds are left unconfigured without any visible
failure].

The series was tested on the Qualcomm IPQ9574 RDP433 and IPQ5424 RDP466
boards.