Re: [PATCH 1/7] dt-bindings: gpio: pl061: add Ambarella CV75 variant

[Krzysztof Kozlowski]

On 09/10/2026 12:57, Long Zhao via B4 Relay wrote:
> From: Long Zhao <longzhao@xxxxxxxxxxxxx>
> 
> The CV75 GPIO is a modified PL061. The basic registers have the same
> names and roles (DAT/DIR/IS/IBE/IEV/IE/MIS/IC). Each bank is 32-bit
> and 32 lines and adds MASK and ENABLE, so it is not
> register-compatible with the ARM PL061 and arm,pl061 must not be
> used as a fallback.
> 
> The AMBA core matches the PL061 driver by PrimeCell ID, not by the DT
> compatible string. These blocks do not implement the standard PL061 ID
> (0x00041061) in the ID registers, so arm,primecell-periphid is required
> and is fixed to 0x000e8061; the driver uses that ID to select the
> Ambarella layout. gpio-ranges is required because each bank is a slice
> of the SoC pinctrl pin space.
> 
> Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> Signed-off-by: Long Zhao <longzhao@xxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/gpio/pl061-gpio.yaml       | 25 +++++++++++++++++++---
>  1 file changed, 22 insertions(+), 3 deletions(-)

This depends on vendor prefix patch at least from the linux-next point
of view.

Best regards,
Krzysztof