Re: [PATCH 1/2] dt-bindings: regulator: add HiSilicon STB voltage regulator

[Conor Dooley]

On Thu, Oct 08, 2026 at 11:57:24PM +0800, David Yang wrote:
> The PMOC block of the HiSilicon STB SoCs drives an external converter
> with a PWM signal. Document the binding.
> 
> Signed-off-by: David Yang <mmyangfl@xxxxxxxxx>
> ---
>  .../regulator/hisilicon,histb-volt.yaml       | 58 +++++++++++++++++++
>  1 file changed, 58 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/regulator/hisilicon,histb-volt.yaml
> 
> diff --git a/Documentation/devicetree/bindings/regulator/hisilicon,histb-volt.yaml b/Documentation/devicetree/bindings/regulator/hisilicon,histb-volt.yaml
> new file mode 100644
> index 000000000000..34deee17d034
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/hisilicon,histb-volt.yaml
> @@ -0,0 +1,58 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/regulator/hisilicon,histb-volt.yaml#

Filename matching a compatible please.
pw-bot: changes-requested

> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: HiSilicon STB voltage regulator
> +
> +maintainers:
> +  - David Yang <mmyangfl@xxxxxxxxx>
> +
> +description: |
> +  HiSilicon STB SoCs provide PWM outputs in the PMOC block which drive an
> +  external converter. The signal is filtered into a DC level between 0 V and
> +  3.3 V which is summed into the feedback input of the converter, so a rail
> +  follows the average level of the PWM signal and its voltage is set by the duty
> +  cycle.
> +
> +  Where the duty cycle maps to in volts is a property of the board, not of the
> +  SoC: the endpoints come from the resistors of the filter and from the
> +  reference voltage of the converter. The datasheets therefore tabulate a
> +  different pair of endpoints for each converter of their reference designs
> +  (0.65 V to 1.15 V for the Hi3798cv200, 0.7 V to 1.25 V for the Hi3798mv200),
> +  and a board built to its own schematic has to describe its own.
> +  regulator-min-microvolt and regulator-max-microvolt are those endpoints of
> +  the linear range, and the regulator has no other source of calibration.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - hisilicon,hi3798cv200-volt
> +      - hisilicon,hi3798mv100-volt
> +      - hisilicon,hi3798mv200-volt

Please note in your commit message what makes the programming model of
these devices incompatible, otherwise please make use of fallback
compatibles.

Thanks,
Conor.

> +
> +  reg:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - regulator-min-microvolt
> +  - regulator-max-microvolt
> +
> +allOf:
> +  - $ref: regulator.yaml#
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    vddcpu: regulator@8a23018 {
> +        compatible = "hisilicon,hi3798mv200-volt";
> +        reg = <0x8a23018 0x4>;
> +        regulator-name = "vdd-cpu";
> +        regulator-min-microvolt = <700000>;
> +        regulator-max-microvolt = <1250000>;
> +        regulator-always-on;
> +    };
> -- 
> 2.53.0
>

Attachment: signature.asc
Description: PGP signature