Re: [PATCH hazptr v2 2/4] ptreq.h: Introduce ptr_eq() to preserve address dependency
From: Boqun Feng
Date: Fri Oct 09 2026 - 15:14:01 EST
On Fri, Oct 09, 2026 at 02:21:33PM -0400, Mathieu Desnoyers wrote:
> Compiler CSE and SSA GVN optimizations can cause the address dependency
> of addresses returned by rcu_dereference to be lost when comparing those
> pointers with either constants or previously loaded pointers.
>
> Introduce ptr_eq() to compare two addresses while preserving the address
> dependencies for later use of the address. It should be used when
> comparing an address returned by rcu_dereference().
>
> This is needed to prevent the compiler CSE and SSA GVN optimizations
> from using @a (or @b) in places where the source refers to @b (or @a)
> based on the fact that after the comparison, the two are known to be
> equal, which does not preserve address dependencies and allows the
> following misordering speculations:
>
> - If @b is a constant, the compiler can issue the loads which depend
> on @a before loading @a.
> - If @b is a register populated by a prior load, weakly-ordered
> CPUs can speculate loads which depend on @a before loading @a.
>
> The same logic applies with @a and @b swapped.
>
> The header "linux/ptreq.h" is the expected include target. It
> contains the documentation of the ptr_eq() API.
>
> An architecture specific implementation of the pointer comparison
> can be implemented by each architecture as asm/ptreq.h. The x86
> implementation is provided initially. If no implementation header is
> present for the architecture, an arch-agnostic fallback based on
> OPTIMIZER_HIDE_VAR is included from asm-generic.
>
> Suggested-by: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
> Suggested-by: Boqun Feng <boqun.feng@xxxxxxxxx>
> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@xxxxxxxxxxxx>
> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> Cc: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
> Cc: "Paul E. McKenney" <paulmck@xxxxxxxxxx>
> Cc: Will Deacon <will@xxxxxxxxxx>
> Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
> Cc: Boqun Feng <boqun.feng@xxxxxxxxx>
> Cc: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
> Cc: John Stultz <jstultz@xxxxxxxxxx>
> Cc: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
> Cc: Boqun Feng <boqun.feng@xxxxxxxxx>
> Cc: Frederic Weisbecker <frederic@xxxxxxxxxx>
> Cc: Joel Fernandes <joel@xxxxxxxxxxxxxxxxx>
> Cc: Josh Triplett <josh@xxxxxxxxxxxxxxxx>
> Cc: Uladzislau Rezki <urezki@xxxxxxxxx>
> Cc: Steven Rostedt <rostedt@xxxxxxxxxxx>
> Cc: Lai Jiangshan <jiangshanlai@xxxxxxxxx>
> Cc: Zqiang <qiang.zhang1211@xxxxxxxxx>
> Cc: Ingo Molnar <mingo@xxxxxxxxxx>
> Cc: Waiman Long <longman@xxxxxxxxxx>
> Cc: Mark Rutland <mark.rutland@xxxxxxx>
> Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> Cc: Vlastimil Babka <vbabka@xxxxxxx>
> Cc: maged.michael@xxxxxxxxx
> Cc: Mateusz Guzik <mjguzik@xxxxxxxxx>
> Cc: Gary Guo <gary@xxxxxxxxxxx>
> Cc: rcu@xxxxxxxxxxxxxxx
> Cc: linux-mm@xxxxxxxxx
> Cc: lkmm@xxxxxxxxxxxxxxx
> Cc: Nikita Popov <github@xxxxxxxxxx>
> Cc: llvm@xxxxxxxxxxxxxxx
> Cc: Lian Wang <lianux.mm@xxxxxxxxx>
> Cc: Kunwu Chan <kunwu.chan@xxxxxxxxx>
> ---
> Changes since v1:
> - Move to linux/ptreq.h, implement x86-specific comparison
I prefer the name ptr_eq.h over ptreq.h :)
With that name fix or there is a strong reason of ptreq.h:
Reviewed-by: Boqun Feng <boqun@xxxxxxxxxx>
Regards,
Boqun
> and asm-generic header (fallback).
>
> Changes since v0:
> - Include feedback from Alan Stern.
> ---
> arch/x86/include/asm/ptreq.h | 16 +++++++++
> include/asm-generic/Kbuild | 1 +
> include/asm-generic/ptreq.h | 16 +++++++++
> include/linux/ptreq.h | 63 ++++++++++++++++++++++++++++++++++++
> 4 files changed, 96 insertions(+)
> create mode 100644 arch/x86/include/asm/ptreq.h
> create mode 100644 include/asm-generic/ptreq.h
> create mode 100644 include/linux/ptreq.h
>
> diff --git a/arch/x86/include/asm/ptreq.h b/arch/x86/include/asm/ptreq.h
> new file mode 100644
> index 000000000000..593b45f80451
> --- /dev/null
> +++ b/arch/x86/include/asm/ptreq.h
> @@ -0,0 +1,16 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef _ASM_X86_PTREQ_H
> +#define _ASM_X86_PTREQ_H
> +
> +#include <linux/types.h>
> +#include <asm/asm.h>
> +
> +static __always_inline
> +bool ptr_eq(const volatile void *a, const volatile void *b)
> +{
> + bool ret;
> + asm(__ASM_SIZE(cmp) " %1,%2" : "=@ccz" (ret) : "r" (a), "r" (b));
> + return ret;
> +}
> +
> +#endif /* _ASM_X86_PTREQ_H */
> diff --git a/include/asm-generic/Kbuild b/include/asm-generic/Kbuild
> index 2bc00c67dc54..e1d95dea09d5 100644
> --- a/include/asm-generic/Kbuild
> +++ b/include/asm-generic/Kbuild
> @@ -47,6 +47,7 @@ mandatory-y += percpu.h
> mandatory-y += percpu_types.h
> mandatory-y += pgalloc.h
> mandatory-y += preempt.h
> +mandatory-y += ptreq.h
> mandatory-y += rqspinlock.h
> mandatory-y += runtime-const.h
> mandatory-y += rwonce.h
> diff --git a/include/asm-generic/ptreq.h b/include/asm-generic/ptreq.h
> new file mode 100644
> index 000000000000..db5a88628b1e
> --- /dev/null
> +++ b/include/asm-generic/ptreq.h
> @@ -0,0 +1,16 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef __ASM_GENERIC_PTREQ_H
> +#define __ASM_GENERIC_PTREQ_H
> +
> +#include <linux/types.h>
> +#include <linux/compiler.h>
> +
> +static __always_inline
> +bool ptr_eq(const volatile void *a, const volatile void *b)
> +{
> + OPTIMIZER_HIDE_VAR(a);
> + OPTIMIZER_HIDE_VAR(b);
> + return a == b;
> +}
> +
> +#endif /* __ASM_GENERIC_PTREQ_H */
> diff --git a/include/linux/ptreq.h b/include/linux/ptreq.h
> new file mode 100644
> index 000000000000..5499f65da30a
> --- /dev/null
> +++ b/include/linux/ptreq.h
> @@ -0,0 +1,63 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef _LINUX_PTREQ_H
> +#define _LINUX_PTREQ_H
> +
> +/*
> + * Compare two addresses while preserving the address dependencies for
> + * later use of the address. It should be used when comparing an address
> + * returned by rcu_dereference().
> + *
> + * This is needed to prevent the compiler CSE and SSA GVN optimizations
> + * from using @a (or @b) in places where the source refers to @b (or @a)
> + * based on the fact that after the comparison, the two are known to be
> + * equal, which does not preserve address dependencies and allows the
> + * following misordering speculations:
> + *
> + * - If @b is a constant, the compiler can issue the loads which depend
> + * on @a before loading @a.
> + * - If @b is a register populated by a prior load, weakly-ordered
> + * CPUs can speculate loads which depend on @a before loading @a.
> + *
> + * The same logic applies with @a and @b swapped.
> + *
> + * Return value: true if pointers are equal, false otherwise.
> + *
> + * The compiler barrier() is ineffective at fixing this issue. It does
> + * not prevent the compiler CSE from losing the address dependency:
> + *
> + * int fct_2_volatile_barriers(void)
> + * {
> + * int *a, *b;
> + *
> + * do {
> + * a = READ_ONCE(p);
> + * asm volatile ("" : : : "memory");
> + * b = READ_ONCE(p);
> + * } while (a != b);
> + * asm volatile ("" : : : "memory"); <-- barrier()
> + * return *b;
> + * }
> + *
> + * With gcc 14.2 (arm64):
> + *
> + * fct_2_volatile_barriers:
> + * adrp x0, .LANCHOR0
> + * add x0, x0, :lo12:.LANCHOR0
> + * .L2:
> + * ldr x1, [x0] <-- x1 populated by first load.
> + * ldr x2, [x0]
> + * cmp x1, x2
> + * bne .L2
> + * ldr w0, [x1] <-- x1 is used for access which should depend on b.
> + * ret
> + *
> + * On weakly-ordered architectures, this lets CPU speculation use the
> + * result from the first load to speculate "ldr w0, [x1]" before
> + * "ldr x2, [x0]".
> + * Based on the RCU documentation, the control dependency does not
> + * prevent the CPU from speculating loads.
> + */
> +
> +#include <asm/ptreq.h>
> +
> +#endif /* _LINUX_PTREQ_H */
> --
> 2.43.0
>