[RFC PATCH v2 0/3] power: sequencing: qcom-wcn: support SW_CTRL wake IRQ

[Linghui Wu]

Some WCN3990-family devices use the SW_CTRL GPIO to indicate that
resources must remain available while the application processor is
suspended.

Teach the Qualcomm WCN power-sequencing driver to use the existing
SW_CTRL GPIO as a dedicated wake IRQ when the power sequencer is marked
as a wakeup source. The PM core keeps the IRQ disabled during normal
operation and arms it for system suspend.

The series documents wakeup-source for the WCN PMU binding and enables
it for the Shikra CQM, CQS and IQS EVKs.

The series is based on next-20261014 and has only been build tested
because a Shikra setup capable of booting linux-next is not currently
available.

Changes in v2:
- Derive the wake IRQ from the existing SW_CTRL GPIO with gpiod_to_irq().
- Drop the separate interrupt description from the binding and DTS.
- Focus the description on the functional behavior.
- Rebase onto next-20261014.

Linghui Wu (3):
  dt-bindings: power: sequencing: qcom-wcn: document wakeup-source
  power: sequencing: qcom-wcn: support SW_CTRL wake IRQ
  arm64: dts: qcom: shikra: enable WCN SW_CTRL wakeup

 .../bindings/regulator/qcom,wcn3990-pmu.yaml  |  6 ++++
 arch/arm64/boot/dts/qcom/shikra-cqm-som.dtsi  |  1 +
 arch/arm64/boot/dts/qcom/shikra-iqs-som.dtsi  |  1 +
 drivers/power/sequencing/pwrseq-qcom-wcn.c    | 36 +++++++++++++++++++
 4 files changed, 44 insertions(+)


base-commit: d419d682257d813f6cb7a28e42b35d0edf4ad038
-- 
2.43.0