Re: [PATCH 0/3] leds: add Realtek RTL9300 port LEDs under software control

[Ross Cawston]

On Sun, Oct 18, 2026 at 10:36 PM UTC, Andrew Lunn wrote:
> Port LEDs should be within the port node of the switch in DT. Ideally
> you want all LEDs for a port to start the with basics, on/off control.
[...]
> So please don't make these LEDs special.

That makes sense. The catch is that RTL9300 has no switch driver
upstream yet, so there is no port node with a driver behind it to put
them in: mainline only has drivers for the switch's I2C and MDIO
controllers.

Unless you see a place they could go in the meantime, I'll withdraw
this series until there is one.

Chris, do you know of anyone working on an RTL9300 switch driver? If
so, I'd be glad to help with the port LEDs there.

Ross