Re: [PATCH] ASoC: qcom: sc8280xp: Derive TDM channels from DT mask

From: Mohammad Rafi Shaik

Date: Wed Oct 21 2026 - 01:30:20 EST




On 10/21/2026 8:23 AM, Shawn Guo wrote:
Derive the AIF_TDM_RX_8 and AIF_TDM_TX_8 backend channel count from
the cpu DAI TDM slot mask in the DT, using the same tx/rx mask
selection as q6tdm_set_tdm_slot(). Each board then gets the channel
count its dai-link describes, e.g. 4/4 on Nord RRD, 6/4 on RIDE.
Keep the default of two when the link has no TDM slot description.

Signed-off-by: Shawn Guo <shengchao.guo@xxxxxxxxxxxxxxxx>
---
sound/soc/qcom/sc8280xp.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)

diff --git a/sound/soc/qcom/sc8280xp.c b/sound/soc/qcom/sc8280xp.c
index 9aae6aadd43d..f3fb13145b3b 100644
--- a/sound/soc/qcom/sc8280xp.c
+++ b/sound/soc/qcom/sc8280xp.c
@@ -303,6 +303,22 @@ static int sc8280xp_be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd,
channels->min = 2;
channels->max = 2;
switch (cpu_dai->id) {
+ case AIF_TDM_RX_8:
+ case AIF_TDM_TX_8: {

This should not be limited to AIF_TDM_RX_8/AIF_TDM_TX_8.

Enable it for all TDM DAI IDs.

case PRIMARY_TDM_RX_0 ... QUINARY_TDM_TX_7:
case AIF_TDM_RX_0 ... AIF_TDM_TX_12:


Best Regards,
Rafi


+ struct qcom_snd_tdm_slot_cfg cpu_cfg, codec_cfg;
+ unsigned int mask;
+
+ if (qcom_snd_get_dai_tdm_slots(rtd, &cpu_cfg, &codec_cfg))
+ break;
+
+ /* Same slot mask selection as q6tdm_set_tdm_slot() */
+ mask = (cpu_dai->id & 0x1) ? cpu_cfg.tx_mask : cpu_cfg.rx_mask;
+ if (mask) {
+ channels->min = hweight32(mask);
+ channels->max = channels->min;
+ }
+ break;
+ }
case TX_CODEC_DMA_TX_0:
case TX_CODEC_DMA_TX_1:
case TX_CODEC_DMA_TX_2: