Re: [PATCH 0/7] arm64: dts: qcom: shikra: Add display overlays for EVK boards

[Konrad Dybcio]

On 10/21/26 4:21 PM, vishnu.saini@xxxxxxxxxxxxxxxx wrote:
> Shikra EVK SoC cards (CQS, CQM, and IQS) are mounted on the Lyra carrier
> card. The DSI0 interface from SoC card is routed to either the 22-pin DSI
> connector on carrier card named as JDISP1 DSI0 or to the B2B connector
> named as PDISP1 DSI0, though a MUX which can be selected by a hardware
> DIP switch. There are multiple daughter cards designed that can be
> connected to this PDISP1 DSI0 B2B connector.
> 
> The below B2B display interfaces are enabled by default in base DTB:
> - IQS: DSI-to-HDMI using the LT9611UXD daughter card
> - CQS/CMS: DLC0697 DSI panel using a DLC daughter card

But if they're daughter cards, they should probably be overlays too?

Konrad