Re: [PATCH v1] arm64: dts: colibri-imx8x-aster: Enable I2C bus

[Frank . Li]

From: Frank Li <Frank.Li@xxxxxxx>


On Thu, 22 Oct 2026 18:17:06 +0200, Francesco Dolcini wrote:
> The Colibri standard I2C bus (SODIMM 194/196) is available on the Aster
> carrier board on the 40-pin extension header X20, the Arduino UNO header
> X18 and the capacitive touch connector X3, with pull-ups on the carrier.
>
> Enable the bus to allow userspace access to I2C devices connected
> through this interface.
>
> [...]

Applied to imx/dt64-intend, will see in linux-next after v7.4-rc1,
thanks!

[1/1] arm64: dts: colibri-imx8x-aster: Enable I2C bus
      commit: ae05b3817c0c5216b829ee4a096adc3833bc33b1

Best regards,
--
Frank Li <Frank.Li@xxxxxxx>