Re: [PATCH v1] arm64: dts: freescale: imx95-aquila: mark +V1.2_DP as boot-on

[Daniel Baluta]

On 10/23/26 13:24, Francesco Dolcini wrote:
> From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
> 
> Mark the +V1.2_DP regulator as boot-on, matching the hardware: the
> CTRL_DP_BRIDGE_EN enable line of this supply of the SN65DSI86 DSI-to-DP
> bridge is pulled up on the module, so the supply is on by default,
> before any software runs.
> 
> Without it the regulator is briefly switched off and on again during
> the board start-up, potentially disrupting I2C transactions on the bus
> where the SN65DSI86 is connected.
> 
> Fixes: d5c082ba23db ("arm64: dts: freescale: add Aquila iMX95 support")
> Signed-off-by: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>

LGTM,

Reviewed-by: Daniel Baluta <daniel.baluta@xxxxxxx>