[PATCH 0/6] Mark USB controllers as dma-coherent

[Krishna Kurapati]

The USB controllers on some platforms are DMA coherent but that property
is not marked in DT. Fix it up.

This series has only been compile tested.

Signed-off-by: Krishna Kurapati <krishna.kurapati@xxxxxxxxxxxxxxxx>
---
Krishna Kurapati (6):
      arm64: dts: qcom: sdx75: Mark USB controller as DMA coherent
      arm64: dts: qcom: lemans: Mark USB controllers as DMA coherent
      arm64: dts: qcom: sm8450: Mark USB controller as DMA coherent
      arm64: dts: qcom: qdu1000: Mark USB controller as DMA coherent
      arm64: dts: qcom: kodiak: Mark USB controllers as DMA coherent
      arm64: dts: qcom: sm8350: Mark USB controllers as DMA coherent

 arch/arm64/boot/dts/qcom/kodiak.dtsi  | 2 ++
 arch/arm64/boot/dts/qcom/lemans.dtsi  | 5 +++++
 arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1 +
 arch/arm64/boot/dts/qcom/sdx75.dtsi   | 1 +
 arch/arm64/boot/dts/qcom/sm8350.dtsi  | 2 ++
 arch/arm64/boot/dts/qcom/sm8450.dtsi  | 1 +
 6 files changed, 12 insertions(+)
---
base-commit: f5672a3dff0291d6a45eb0c258b9d2baeb4dc577
change-id: 20261029-usb-dma-coherent-e9001f1839b3

Best regards,
--  
Krishna Kurapati <krishna.kurapati@xxxxxxxxxxxxxxxx>