[PATCH] drivers: scsi: aic7xxx: spelling corrections in comments
From: Daniel West
Date: Thu Oct 29 2026 - 15:31:36 EST
Fixed multiple speeling errors in the comments.
Signed-off-by: Daniel West <daniel.west.dev@xxxxxxxxx>
---
drivers/scsi/aic7xxx/aic7xxx.h | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/aic7xxx/aic7xxx.h b/drivers/scsi/aic7xxx/aic7xxx.h
index 20857c213c72..39352ffaba7e 100644
--- a/drivers/scsi/aic7xxx/aic7xxx.h
+++ b/drivers/scsi/aic7xxx/aic7xxx.h
@@ -432,9 +432,9 @@ struct hardware_scb {
* each S/G element is expired, its datacnt field is checked to see
* if the LAST_SEG flag is set. If so, SG_LIST_NULL is set in the
* residual sg ptr and the transfer is considered complete. If the
- * sequencer determines that there is a residual in the tranfer, it
+ * sequencer determines that there is a residual in the transfer, it
* will set the SG_RESID_VALID flag in sgptr and dma the scb back into
- * host memory. To sumarize:
+ * host memory. To summarize:
*
* Sequencer:
* o A residual has occurred if SG_FULL_RESID is set in sgptr,
@@ -499,7 +499,7 @@ struct hardware_scb {
* the length to store additional address bits and a flag to indicate
* that a given segment terminates the transfer. This gives us an
* addressable range of 512GB on machines with 64bit PCI or with chips
- * that can support dual address cycles on 32bit PCI busses.
+ * that can support dual address cycles on 32bit PCI buses.
*/
struct ahc_dma_seg {
uint32_t addr;
@@ -741,7 +741,7 @@ struct ahc_syncrate {
#define AHC_ULTRA2_XFER_PERIOD 0x0a
/*
- * Indexes into our table of syncronous transfer rates.
+ * Indexes into our table of synchronous transfer rates.
*/
#define AHC_SYNCRATE_DT 0
#define AHC_SYNCRATE_ULTRA2 1
@@ -970,7 +970,7 @@ struct ahc_softc {
/*
* Device instance currently on the bus awaiting a continue TIO
- * for a command that was not given the disconnect priveledge.
+ * for a command that was not given the disconnect privilege.
*/
struct ahc_tmode_lstate *pending_device;
--
2.51.0