[PATCH 0/3] iio: pressure: dps310: fix input checks and resets

[Rupesh Majhi]

Sashiko flagged these as pre-existing in its review of the FIFO series
v8 [1]. All three reproduce on a DPS310 on a BeagleBone Black:

- 0 or 0.5 written to a rate or ratio is accepted. Ratio 0 puts a
  reserved value in the register: pressure reads fail with -ERANGE,
  temperature reads 974 C.
- A warm reboot during a FIFO capture leaves FIFO_EN set. After it,
  every raw read times out until the driver is unbound.
- The reset after a read timeout silently puts the rate and ratio back
  to their defaults.

Patch 2 fixes a commit that is only in iio testing so far.

Paulius, patch 2 also resets the ZTS8032 at probe, the same reset that
remove already does. A Tested-by would be welcome if you have time.

Based on iio testing. Reproduced and fixed with help from an LLM coding
assistant.

[1] https://sashiko.dev/#/patchset/20260921183132.233136-1-zoone.rupert%40gmail.com

Cc: Paulius Zaleckas <paulius.zaleckas@xxxxxxxxx>

Rupesh Majhi (3):
  iio: pressure: dps310: reject a zero rate or oversampling ratio
  iio: pressure: dps310: reset the chip at probe
  iio: pressure: dps310: keep the user's settings across a timeout reset

 drivers/iio/pressure/dps310.c | 38 ++++++++++++++++++++++++++---------
 1 file changed, 28 insertions(+), 10 deletions(-)


base-commit: 7d80b4b383bc53b48abd3a30ca4a91cdab568bfa
-- 
2.43.0