[PATCH v3 3/7] regulator: pm8008: Add mode voting support for PM8010

[Jishnu Prakash]

From: Dhruvin Rajpura <drajpura@xxxxxxxxxxxxxxxx>

Implement set_mode/get_mode support for PM8010 LDOs using the mode
control and status registers to allow clients to vote for LDO modes.
Mode voting is not supported in the PM8008 LDOs.

Signed-off-by: Dhruvin Rajpura <drajpura@xxxxxxxxxxxxxxxx>
Signed-off-by: Jishnu Prakash <jishnu.prakash@xxxxxxxxxxxxxxxx>
---
 drivers/regulator/qcom-pm8008-regulator.c | 74 ++++++++++++++++++++++++++++++-
 1 file changed, 73 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/qcom-pm8008-regulator.c b/drivers/regulator/qcom-pm8008-regulator.c
index b484c0f73eea..3db825e93731 100644
--- a/drivers/regulator/qcom-pm8008-regulator.c
+++ b/drivers/regulator/qcom-pm8008-regulator.c
@@ -24,6 +24,11 @@
 
 #define LDO_VSET_LB_REG			0x40
 
+#define LDO_MODE_CTL1_REG		0x45
+#define MODE_PRIMARY_MASK		GENMASK(2, 0)
+#define LDO_MODE_NPM			7
+#define LDO_MODE_LPM			4
+
 #define LDO_ENABLE_REG			0x46
 #define ENABLE_BIT			BIT(7)
 
@@ -46,6 +51,7 @@ struct pm8008_match_data {
 	const bool has_stepper_ctl_reg;
 	const struct pm8008_regulator_data *regulator_data;
 	const int num_regulators;
+	const struct regulator_ops *ops;
 };
 
 static const struct linear_range pm8008_nldo_ranges[] = {
@@ -134,6 +140,57 @@ static int pm8008_regulator_get_voltage_sel(struct regulator_dev *rdev)
 	return regulator_map_voltage_linear_range(rdev, uV, INT_MAX);
 }
 
+static int pm8010_regulator_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	struct pm8008_regulator *preg = rdev_get_drvdata(rdev);
+	unsigned int val;
+
+	switch (mode) {
+	case REGULATOR_MODE_NORMAL:
+		val = LDO_MODE_NPM;
+		break;
+	case REGULATOR_MODE_IDLE:
+		val = LDO_MODE_LPM;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(preg->regmap, preg->base + LDO_MODE_CTL1_REG,
+				   MODE_PRIMARY_MASK, val);
+}
+
+static unsigned int pm8010_regulator_get_mode(struct regulator_dev *rdev)
+{
+	struct pm8008_regulator *preg = rdev_get_drvdata(rdev);
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(preg->regmap, preg->base + LDO_MODE_CTL1_REG, &val);
+	if (ret < 0)
+		return REGULATOR_MODE_INVALID;
+
+	switch (val & MODE_PRIMARY_MASK) {
+	case LDO_MODE_NPM:
+		return REGULATOR_MODE_NORMAL;
+	case LDO_MODE_LPM:
+		return REGULATOR_MODE_IDLE;
+	default:
+		return REGULATOR_MODE_INVALID;
+	}
+}
+
+static unsigned int pm8010_regulator_of_map_mode(unsigned int mode)
+{
+	switch (mode) {
+	case REGULATOR_MODE_NORMAL:
+	case REGULATOR_MODE_IDLE:
+		return mode;
+	default:
+		return REGULATOR_MODE_INVALID;
+	}
+}
+
 static const struct regulator_ops pm8008_regulator_ops = {
 	.list_voltage		= regulator_list_voltage_linear_range,
 	.set_voltage_sel	= pm8008_regulator_set_voltage_sel,
@@ -143,6 +200,17 @@ static const struct regulator_ops pm8008_regulator_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
 };
 
+static const struct regulator_ops pm8010_regulator_ops = {
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.set_voltage_sel	= pm8008_regulator_set_voltage_sel,
+	.get_voltage_sel	= pm8008_regulator_get_voltage_sel,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.set_mode		= pm8010_regulator_set_mode,
+	.get_mode		= pm8010_regulator_get_mode,
+};
+
 static int pm8008_regulator_probe(struct platform_device *pdev)
 {
 	const struct pm8008_match_data *match_data;
@@ -185,7 +253,9 @@ static int pm8008_regulator_probe(struct platform_device *pdev)
 		desc->supply_name = data->supply_name;
 		desc->of_match = data->name;
 		desc->regulators_node = of_match_ptr("regulators");
-		desc->ops = &pm8008_regulator_ops;
+		desc->ops = match_data->ops;
+		if (desc->ops == &pm8010_regulator_ops)
+			desc->of_map_mode = pm8010_regulator_of_map_mode;
 		desc->type = REGULATOR_VOLTAGE;
 		desc->owner = THIS_MODULE;
 
@@ -231,12 +301,14 @@ static const struct pm8008_match_data pm8008_data = {
 	.has_stepper_ctl_reg = true,
 	.regulator_data = pm8008_reg_data,
 	.num_regulators = ARRAY_SIZE(pm8008_reg_data),
+	.ops = &pm8008_regulator_ops,
 };
 
 static const struct pm8008_match_data pm8010_data = {
 	.has_stepper_ctl_reg = false,
 	.regulator_data = pm8010_reg_data,
 	.num_regulators = ARRAY_SIZE(pm8010_reg_data),
+	.ops = &pm8010_regulator_ops,
 };
 
 static const struct platform_device_id pm8008_regulator_id_table[] = {

-- 
2.43.0