Re: [PATCH iwl-net] e1000e: close and reattach the netdev when e1000e_pm_thaw() fails

[Linkui Xiao]

Hi,

Thanks for the automated review.

On 2026/10/28 17:35, netdev-bot+sinfo@xxxxxxxxxx wrote:
> Hi!
>
> This is an automated message. This series looks like a fix, but its
> commit messages seem to be missing some information:
>
>   - How the issue was discovered, e.g. hit in production, hit during
>     development, syzbot report, manual code inspection, LLM or static
>     analysis tool scan.
>
>   - Whether the issue was actually triggered, or is only theoretical
>     (e.g. found by code inspection). If it was triggered please include
>     the symptoms, like the stack trace or error messages.
>
>   - What hardware the change was tested on. For driver fixes please
>     mention the device (and if relevant firmware version) used for
>     testing, or say that the change was not tested on real hardware.
>
> Please do not repost the series just to address the above. Instead,
> reply to this email with the missing information, so that reviewers
> can take it into account. If the series needs another revision for
> other reasons, please include the information in the commit messages
> then.
>
> The evaluation is done by an LLM so it may be wrong, if you think
> that is the case please reply and explain.

Please find the missing information below.

- Discovery: The issue was found during manual code review/inspection of
  the e1000e PM thaw error handling. It was not reported by a user, syzbot,
  or a static analysis tool.

- Triggering: The issue has not been triggered in practice. It is based on
  code inspection and is currently theoretical. I have not reproduced the
  failure path or collected a stack trace/error log.

- Hardware testing: The change has not been tested on real hardware. No
  specific e1000e device or firmware version was used for testing. It was
  only compile-tested.

I will include this information in the commit message if another revision
is needed for other reasons.

Thanks,
Linkui Xiao