[PATCH] dt-bindings: spi: qcom,spi-geni-qcom: Document QSPI support

[Jyothi Kumar Seerapu]

Add the "qcom,geni-qspi" compatible to identify GENI Serial Engine
instances configured for QSPI operation.

The compatible also allows the driver to select the appropriate protocol
firmware when the Serial Engine is unconfigured (GENI_SE_INVALID_PROTO),
distinguishing between SPI and QSPI firmware.

Signed-off-by: Jyothi Kumar Seerapu <jyothi.seerapu@xxxxxxxxxxxxxxxx>
---
---
 Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml
index edf399681d7a..e568b67d077e 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml
@@ -19,6 +19,10 @@ description:
   SPI in master mode supports up to 50MHz, up to four chip selects,
   programmable data path from 4 bits to 32 bits and numerous protocol variants.
 
+  The "qcom,geni-qspi" compatible string identifies GENI serial engine
+  instances configured for QSPI operation. QSPI supports transfers over
+  multiple data lines for higher throughput than standard SPI.
+
   SPI Controller nodes must be child of GENI based Qualcomm Universal
   Peripharal. Please refer GENI based QUP wrapper controller node bindings
   described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml.
@@ -29,7 +33,9 @@ allOf:
 
 properties:
   compatible:
-    const: qcom,geni-spi
+    enum:
+      - qcom,geni-spi
+      - qcom,geni-qspi
 
   clocks:
     maxItems: 1

---
base-commit: 7079a12d7506b07fb53b54a664bfad5fa9b16d70
change-id: 20260916-qspi_dt_binding-8a1cb7a8772e

Best regards,
--  
Jyothi Kumar Seerapu <jyothi.seerapu@xxxxxxxxxxxxxxxx>