Re: [PATCH v2 5/7] arm64: dts: qcom: Add device tree for Lemans GearVM variant

[Shawn Guo]

On Thu, Oct 15, 2026 at 08:15:21PM -0700, Deepti Jaggi wrote:
> 
> 
> On 10/14/2026 7:37 PM, Shawn Guo wrote:
> > Add lemans-gearvm.dtsi for Lemans GearVM variant (SA8255P) that utilizes
> > firmware to configure platform resources such as clocks, interconnects
> > and TLMM.
> > Device drivers request these resources through the SCMI power, reset and
> > performance protocols.  Assign each device driver a dedicated SCMI
> > channel and Tx/Rx doorbells to support parallel resource requests and
> > aggregation in the SCMI platform server.  Operate the SCMI server stack
> > in an SMP-enabled VM using the Qualcomm SMC/HVC transport driver for
> > communication.
> > 
> > Group resource operations to improve abstraction and reduce the number of
> > SCMI requests.  Follow the SCMI-based resource management approach
> > demonstrated by Qualcomm at Linaro Connect 2024 [1].
> > 
> > [1] https://resources.linaro.org/en/resource/wfnfEwBhRjLV1PEAJoDDte
> > 
> > Co-developed-by: Shazad Hussain <shazad.hussain@xxxxxxxxxxxxxxxx>
> > Signed-off-by: Shazad Hussain <shazad.hussain@xxxxxxxxxxxxxxxx>
> > Signed-off-by: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
> > Co-developed-by: Deepti Jaggi <deepti.jaggi@xxxxxxxxxxxxxxxx>
> > Signed-off-by: Deepti Jaggi <deepti.jaggi@xxxxxxxxxxxxxxxx>
> > Signed-off-by: Shawn Guo <shengchao.guo@xxxxxxxxxxxxxxxx>
> > ---
> >  arch/arm64/boot/dts/qcom/lemans-gearvm.dtsi | 3232 +++++++++++++++++++
> >  1 file changed, 3232 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/qcom/lemans-gearvm.dtsi
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/lemans-gearvm.dtsi b/arch/arm64/boot/dts/qcom/lemans-gearvm.dtsi
> > new file mode 100644
> > index 000000000000..4c155cbc7975
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/qcom/lemans-gearvm.dtsi
> > @@ -0,0 +1,3232 @@
> > +// SPDX-License-Identifier: BSD-3-Clause
> > +/*
> > + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
> > + */
> > +
> > +#include "lemans.dtsi"
> > +
> > +/delete-node/ &xbl_boot_mem;
> > +/delete-node/ &pil_adsp_mem;
> > +/delete-node/ &q6_adsp_dtb_mem;
> > +/delete-node/ &q6_gdsp0_dtb_mem;
> > +/delete-node/ &pil_gdsp0_mem;
> > +/delete-node/ &pil_gdsp1_mem;
> > +/delete-node/ &q6_gdsp1_dtb_mem;
> > +/delete-node/ &q6_cdsp0_dtb_mem;
> > +/delete-node/ &pil_cdsp0_mem;
> > +/delete-node/ &pil_gpu_mem;
> > +/delete-node/ &q6_cdsp1_dtb_mem;
> > +/delete-node/ &pil_cdsp1_mem;
> > +/delete-node/ &pil_cvp_mem;
> > +/delete-node/ &pil_video_mem;
> > +/delete-node/ &scmi_mem;
> > +/delete-node/ &firmware_reserved_mem;
> > +
> > +/ {
> > +	clocks {
> > +		bi_tcxo_div2: bi-tcxo-div2-clk {
> > +			compatible = "fixed-factor-clock";
> > +			clocks = <&xo_board_clk>;
> > +			clock-mult = <1>;
> > +			clock-div = <2>;
> > +			#clock-cells = <0>;
> > +		};
> > +
> > +		gpll0_board_clk: gpll0-board-clk {
> > +			compatible = "fixed-clock";
> > +			#clock-cells = <0>;
> > +		};
> > +
> > +		sleep_clk: sleep-clk {
> > +			compatible = "fixed-clock";
> > +			#clock-cells = <0>;
> > +		};
> > +
> > +		xo_board_clk: xo-board-clk {
> > +			compatible = "fixed-clock";
> > +			#clock-cells = <0>;
> > +		};
> > +	};
> > +};
> > +
> > +&adreno_smmu {
> > +	power-domains = <&scmi15_pd 0>;
> > +};
> > +
> > +&cpufreq_hw {
> > +	clocks = <&bi_tcxo_div2>, <&gpll0_board_clk>;
> > +	clock-names = "xo", "alternate";
> > +};
> > +
> > +&firmware {
> > +	scm {
> > +		memory-region = <&tz_ffi_mem>;
> > +	};
> > +
> > +	scmi0: scmi-0 {
> > +		compatible = "qcom,scmi-smc";
> > +		arm,smc-id = <0xc6008012>;
> > +		shmem = <&shmem0>;
> > +
> 
> As bootloader updates the irq, we can add a comment here.

Sure, like what we did on Nord.

Shawn