[PATCH 10/11] arm64: dts: qcom: sdm845-xiaomi-beryllium: Enable vbus support
From: David Heidelberg via B4 Relay
Date: Sat Oct 31 2026 - 11:13:56 EST
From: David Heidelberg <david@xxxxxxx>
On this device, vbus was setup and switched off by the charger driver.
Enable proper driver.
Signed-off-by: David Heidelberg <david@xxxxxxx>
---
arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
index 35babe8c5f757..2986693b3ed71 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -414,16 +414,23 @@ led-1 {
};
};
&pm8998_resin {
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
};
+&pmi8998_vbus {
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <1500000>;
+
+ status = "okay";
+};
+
/* QUAT I2S Uses 1 I2S SD Line for audio on TAS2559/60 amplifiers */
&q6afedai {
dai@22 {
reg = <QUATERNARY_MI2S_RX>;
qcom,sd-lines = <0>;
};
};
@@ -678,9 +685,8 @@ &wifi {
vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
qcom,calibration-variant = "xiaomi_beryllium";
qcom,snoc-host-cap-skip-quirk;
};
-
--
2.55.0