[PATCH 08/11] arm64: dts: qcom: sdm845-shift-axolotl: Enable vbus support

[David Heidelberg via B4 Relay]

From: David Heidelberg <david@xxxxxxx>

On this device, vbus was setup and switched off by the charger driver.
Enable proper driver.

Signed-off-by: David Heidelberg <david@xxxxxxx>
---
 arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
index 1b0eaeafbd517..124717214edd6 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -654,16 +654,23 @@ led-1 {
 		color = <LED_COLOR_ID_YELLOW>;
 		led-sources = <2>;
 		led-max-microamp = <100000>;
 		flash-max-microamp = <1100000>;
 		flash-max-timeout-us = <1280000>;
 	};
 };
 
+&pmi8998_vbus {
+	regulator-min-microamp = <500000>;
+	regulator-max-microamp = <1500000>;
+
+	status = "okay";
+};
+
 &qup_uart9_rx {
 	drive-strength = <2>;
 	bias-pull-up;
 };
 
 &qup_uart9_tx {
 	drive-strength = <2>;
 	bias-disable;

-- 
2.55.0